Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communication S7-315 and Powermanager

Created by: mpt7777 at: 2/1/2013 10:39 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/1/2013 10:39 AM	Rate (0)
mpt7777 Member Joined: 2/1/2013 Last visit: 7/19/2021 Posts: 3 Rating: (0)	Hello, I must do a MODBUS TCP communication between a 315-2 PN/DP and the POWERMANAGER software. I think that the S7 is server and the POWERMANAGER is client. I haveto configurewith the TCP WIZARD but the communication is not working. In attachment you can found my DB2 configuration Thanks for your help OUCW_1STRUCT block_lengthWORDW#16#40#!MODBUS_POW_MAN!# idWORDW#16#1 connection_typeBYTEB#16#11 active_estBOOLTRUE local_device_idBYTEB#16#2 local_tsap_id_lenBYTEB#16#0 rem_subnet_id_lenBYTEB#16#0 rem_staddr_lenBYTEB#16#4 rem_tsap_id_lenBYTEB#16#2 next_staddr_lenBYTEB#16#0 local_tsap_idARRAY[1..16]B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0 BYTE rem_subnet_idARRAY[1..6]B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0 BYTE rem_staddrARRAY[1..6]B#16#A, B#16#2D, B#16#79, B#16#F7, B#16#0, B#16#0 BYTE rem_tsap_idARRAY[1..16]B#16#1, B#16#F6, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0 BYTE next_staddrARRAY[1..6]B#16#0, B#16#0, B#16#0, B#16#0, B#16#0, B#16#0 BYTE spareWORDW#16#0#!MODBUS_POW_MAN!# server_clientBOOLTRUE single_writeBOOLFALSE connect_at_startupBOOLTRUE reservedBYTEB#16#0 data_type_1BYTEB#16#3 db_1WORDW#16#B start_1WORDW#16#0 end_1WORDW#16#2 data_type_2BYTEB#16#0 db_2WORDW#16#C start_2WORDW#16#2D0 end_2WORDW#16#384 data_type_3BYTEB#16#0 db_3WORDW#16#D start_3WORDW#16#2D0 end_3WORDW#16#3E8 data_type_4BYTEB#16#0 db_4WORDW#16#E start_4WORDW#16#280 end_4WORDW#16#4E2 data_type_5BYTEB#16#0 db_5WORDW#16#F start_5WORDW#16#6A4 end_5WORDW#16#8FC data_type_6BYTEB#16#0 db_6WORDW#16#10 start_6WORDW#16#6A4 end_6WORDW#16#8FC data_type_7BYTEB#16#0 db_7WORDW#16#7 start_7WORDW#16#0 end_7WORDW#16#64 data_type_8BYTEB#16#0 db_8WORDW#16#8 start_8WORDW#16#0 end_8WORDW#16#64 internal_send_bufferARRAY[1..260]B#16#0 BYTE internal_recv_bufferARRAY[1..260]B#16#0 BYTE END_STRUCT

Suggestion To thank Quote Answer

2/1/2013 10:54 AM	Rate (0)
Kaulquappe Posts: 3093 Rating: (323)	Hello mpt7777, the client executes active connection estabishment in most of the cases. I expect Powermanager does it as well. When the S7 acts as server I recommend to use a passive unspecified connection as described in the manual. Regards, Kaulquappe
Kaulquappe Posts: 3093 Rating: (323)
Suggestion To thank Quote Answer

8/11/2016 4:34 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by cesaroso is split to a separate thread with the subject SENTRON powermanager v3.2, can't see the electrical values. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

ModbusTCP

Follow us on