Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how can l send my cam file(program) to cnc( siemens 810 M GA3 cnc milling machine)

Created by: metin0147 at: 3/19/2009 11:49 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

3/19/2009 11:49 PM	Rate (0)
metin0147 Posts: 5 Rating: (0)	does anyone help me,please? how can l send my cam file(program) to cnc( siemens 810 M GA3 cnc milling machine)). l have cable(between cnc and computer), winpcin and windows xp computer. who tell me step one step, from begining to end ? l need it very much. someone teach me ? l couldn't do anything. which paramater must l change? could you send me step by step jpeg file?( maybe you can take it photograph by mobile phone) l need it very much. thaanks for everythings. l willl wait for your message. metin_evrensel@hotmail.com
metin0147 Posts: 5 Rating: (0)	Last edited by: metin0147 at: 3/20/2009 8:58 AM Last edited by: Blue Moderator at: 20.03.2009 08:09 Renamed thread
Suggestion To thank Quote Answer

3/20/2009 6:09 PM	Rate (0)
Gebhardt Karl Platinum Expert Joined: 7/16/2006 Last visit: 1/2/2024 Posts: 1502 Rating: (176)	Hi You read through this document. For further please ask in this forum. (Personal email can not be accepted) Attachment Transfer_Sytem3_to_PCIN.zip (574 Downloads)
	Karl
Suggestion To thank Quote Answer

3/21/2009 12:08 AM	Rate (0)
metin0147 Posts: 5 Rating: (0)	sorry ,. l'm a tecnical teacher, and we have a siemens 810M GA3 cnc pannel machine our school(in turkey), if we learn it than we teach it to our students. if you know, tell us step by step... l ll try it , l hope it will help us. thanks now, dou you have siemens 810M cnc programming file. how we use it, l downloaded all of in here, but they arent explain it easly to us. maybe you can give me reall dokumen, notes etc. metin_evrensel@hotmail.com Gebhardt Karl Hi You read through this document. For further please ask in this forum. (Personal email can not be accepted)
metin0147 Posts: 5 Rating: (0)	Last edited by: metin0147 at: 3/21/2009 12:14 AM
Suggestion To thank Quote Answer

4/8/2009 9:54 PM	Rate (0)
metin0147 Posts: 5 Rating: (0)	hi, do you know how my machine siemens 810M GA3 reads fanuc post as siemens post, a new siemens machine , if we adds G291 top of fonuc post, machine reads this as siemens post, is there any code as this old machine post? sorry for my english. thanks
metin0147 Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

4/9/2009 3:44 PM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 11/4/2024 Posts: 4064 Rating: (357)	metin0147 hi, do you know how my machine siemens 810M GA3 reads fanuc post as siemens post, a new siemens machine , if we adds G291 top of fonuc post, machine reads this as siemens post, is there any code as this old machine post? sorry for my english. thanks ++++++++++++++++ Hi, make sure what is your problem? from you post I guess you have software such as PCIN or Winpcin to transfer NC programs from ext. PC to NC(such as 810M or 802C,802D) but 810M cannot read Fanuc NC code. and for 810M you can modify you CAM file in its format starting with %MPF1234 and every letter should be CAPITAL (N0005 G54 G90 X-100....) then you can transfer your file to 810M.
	If you like my comments please use "Thank" bottom left or Rating Top right
Suggestion To thank Quote Answer

11/2/2016 3:08 PM	Rate (0)
Wit_Moderator Moderator Joined: 8/21/2014 Last visit: 11/5/2024 Posts: 1024 Rating: (14)	New question published by 0092 is split to a separate thread with the subject Sending my cam file (program) to cnc (Siemens 810 M GA3 cnc milling machine). Best regards The Helping Hand
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Wit_Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on