Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Ack alarm of ALARM_8P within AS.

Created by: Jaapie at: 4/10/2008 3:30 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/10/2008 3:30 PM	Rate (0)
Jaapie Gold Member Joined: 1/17/2006 Last visit: 7/19/2024 Posts: 800 Rating: (63)	Hi All, Does any one know how to acknowledge an alarm of the ALARM_8P within a AS so without the OS (WinCC)? Thanks in advance, Jaap

Suggestion To thank Quote Answer

5/4/2008 7:31 AM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Will somebody take on this challenge?
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

5/15/2008 1:05 PM	Rate (0)
yuwa Posts: 62 Rating: (2)	Hi, I have the same problem. I also waiting for any advise.
yuwa Posts: 62 Rating: (2)
Suggestion To thank Quote Answer

5/15/2008 2:13 PM	Rate (0)
Jaapie Gold Member Joined: 1/17/2006 Last visit: 7/19/2024 Posts: 800 Rating: (63)	We made something like this (only still with an OS ): In the AS we created a DB. Everytime the AS wants to ack an alarm he writes the alarm number into this DB. This alarmnumber is not the same as the alarmnumber in the OS but with the right offset you can calculate the number in the OS. You can determin this offset bij trying. Watchout the offset will change if you remove the references (of the multi project) within the userproject. In the OS we created an action witch reads the db and acks the alarmnumbers within the AS. A bit overdone but it was the only way..... Someone a better idea??

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on