Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

holding brake of 1ph7 motor

Created by: wreng at: 8/27/2008 2:57 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/27/2008 2:57 PM	Rate (0)
wreng Advanced Member Joined: 7/27/2008 Last visit: 11/8/2023 Posts: 25 Rating: (0)	Hello I'm using 1ph7163 motor with holding brake for positioning control. in ready to operating condition, the sinamics drive is enabled and the holding brake is energized. Is there any restriction about duration of energizing brake? Where can i get the information? I'm worry about damage of brake coil. Thanx

Suggestion To thank Quote Answer

8/27/2008 6:58 PM	Rate (0)
Gebhardt Karl Platinum Member Joined: 7/16/2006 Last visit: 1/2/2024 Posts: 1502 Rating: (176)	No, the brake can be 24 hours or more active.
	Karl
Suggestion To thank Quote Answer

8/27/2008 7:56 PM	Rate (0)
wreng Advanced Member Joined: 7/27/2008 Last visit: 11/8/2023 Posts: 25 Rating: (0)	Hello Karl Thank you for your quick answer Best regard

Suggestion To thank Quote Answer

8/27/2008 8:15 PM	Rate (0)
Gebhardt Karl Platinum Member Joined: 7/16/2006 Last visit: 1/2/2024 Posts: 1502 Rating: (176)	No problem For Information: You can "Rate" my answer "Rate"-Button an right side.
	Karl
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on