Is there any Analog Module in S7-1500 that can directly accept the Type G Thermocouple, else what is the possible converter that can be used between the thermocouple and the analog module.

Thanks and Regards

Chandhaa

TURCK makes a multi-functional Profinet IO module that accepts Type G TCs as input, and then makes it available via profinet / telegram.

There may be other types of signal conditioner options available.

You can also use a standard mV analog input and scale it yourself using published look-up table data.  The only problem will be temperature compensation.

Used for glass making of some sort?  

chandhaa

Is there any Analog Module in S7-1500 that can directly accept the Type G Thermocouple, else what is the possible converter that can be used between the thermocouple and the analog module.

Thanks and Regards

Chandhaa

 Thanks huggy_d1.

This is for a retrofit in a sintering furnace.

huggy_d1

TURCK makes a multi-functional Profinet IO module that accepts Type G TCs as input, and then makes it available via profinet / telegram.

There may be other types of signal conditioner options available.

You can also use a standard mV analog input and scale it yourself using published look-up table data.  The only problem will be temperature compensation.

Used for glass making of some sort?  

chandhaa

Is there any Analog Module in S7-1500 that can directly accept the Type G Thermocouple, else what is the possible converter that can be used between the thermocouple and the analog module.

Thanks and Regards

Chandhaa