Industry Online Support
Technical Forum
Navigation
Rating 
Thanks 0
4 Entries
| 9/10/2008 4:35 AM | |
|
Posts: 24 Rating:
|
Hi. If tool warning or tool life become active , what signal send from NC to PLC? Best regard? |
| 9/10/2008 5:48 PM | |
Joined: 7/16/2006 Last visit: 1/2/2024 Posts: 1502 Rating:
|
Tell us more. I dont know what you mean. |
|
Karl |
|
| 9/11/2008 3:14 PM | |
Joined: 1/29/2008 Last visit: 7/26/2022 Posts: 419 Rating:
|
Hi What kind of NC do you have? What configuration? Best |
| 9/15/2008 9:46 AM | |
Joined: 9/18/2006 Last visit: 11/14/2024 Posts: 593 Rating:
|
Hi. In 802D Solution Line - V53000000.0 and V53000000.1. In 840D with use ToolManagement db72.db72.dbw38 bit 4. |
Follow us on