Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Write in file

Created by: mattam at: 3/24/2011 12:59 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/24/2011 12:59 PM	Rate (0)
mattam Posts: 23 Rating: (0)	Dear experts! We have sinumerik 840Di and we would like to write position data into file. Problem appers because the WRITE (int error, "string path", "string data") function does not accept the integer type of variable but accept only string type of variable. We can not convert position data which is in integer type to string type. How can we convert this data and write it to file? Best regards!
mattam Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

3/24/2011 3:44 PM	Rate (0)
CNC600 Silver Member Joined: 10/27/2009 Last visit: 3/15/2024 Posts: 455 Rating: (77)	Hi, You need to use the "chain-operator": << sample: DEF INT ERRRR DEF INT KATRIN KATRIN = 1234 WRITE ( ERRRR, "TEST", <<KATRIN) The result is: TEST.MPF, inside You'll find 1234 hope that helps CNC600
	hope that helps CNC600
Suggestion To thank Quote Answer

3/24/2011 4:40 PM	Rate (0)
mattam Posts: 23 Rating: (0)	Hi Thank you very much. I will try tomorrow. Best regards
mattam Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

4/13/2019 4:26 PM	Rate (0)
lc2018 Posts: 5 Rating: (0)	absolutely it works.
lc2018 Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on