How do I add CFC /SFC to my STARTER installation

Please also see the screenshot.

I need to be able to do fault finding and editing of the drives programming using the STARTER program- but I cannot fully open these drives because I am missing the CFC/SFC package.

So - which package (Vol_1_STARTER_V45_SP1_Program_G110_G120 or Vol_2_STARTER_V45_SP1_SSPs_Rest_of_SINAMICS_Family or Vol_3_STARTER_V45_SP1_HELPS) is CFC /SFC included in and how do I add it to my STARTER?

Hello,

is in the VOL1.

Start the setup of STARTER and select Package Install, select CFC and start this install.

Regards

Christoph

Thank you for answering Christoph,

That worked.

But I get a new messages of things missing - please see the screenshot.

How do I get these updates (installed)?

ChristophD

Hello,

is in the VOL1.

Start the setup of STARTER and select Package Install, select CFC and start this install.

Regards

Christoph

Hello,

this mean that some SSP not installed for devices in the project.

Start the Vol1 Setup again and select the SSP you need.

the SSP G120  4.7 Sp9 can be found here

https://support.industry.siemens.com/cs/ww/en/view/109750914

the G120 SSP 4.7 SP10 can be found here:
https://support.industry.siemens.com/cs/ww/en/view/109757079

For the SSP 4.7.10 you need a newer STARTER!

Regards

Christoph