7/31/2019 6:26 PM | |
Posts: 1 Rating:
|
Hi JDMG, have you found a solution for this problem? I am having the same problem you mentioned, but with other brands devices. We have an assembly line and if we do a scan using starter, Balluf's I-O links ( with rfid's connected to them) and servos Rexroth stop communicating. We have to restart the machines or download the hardware to restablish the connection. All of other devices are ok. There are more than 200 profinet devices in this line. Avoid using starter to search the nodes is not an option because we can't guarantee that somebody is't going to scan the network . They only use Starter over there. We tracked in the lab ( 1 pc, 1 clp and 1 i-o link) the network with WireShark to debug what's causing the problem . BALLUFF's I-O LINK - 10.219.14.4
Does anybody know how to solve this issue? Kind Regards, Pablo.
------------------------------------------------------------------------------------------ |
Last edited by: pabspagg at: 07/31/2019 18:30:50Last edited by: Jen_Moderator at: 08/01/2019 07:35:12New subject after splitting |
|
Follow us on