Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Please help simulated tag

Created by: Andrews13 at: 5/1/2020 4:21 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

5/1/2020 4:21 PM	Rate (0)
Andrews13 Experienced Member Joined: 4/29/2016 Last visit: 10/31/2024 Posts: 23 Rating: (0)	Please help simulated tag How do I create a simulated tag in WinCC Unified? Just like in the old WinCC Flexible 2008? Please help Please help Please help Attachment wincc.jpg (581 Downloads)

Suggestion To thank Quote Answer

5/1/2020 4:27 PM	Rate (0)
Andrews13 Experienced Member Joined: 4/29/2016 Last visit: 10/31/2024 Posts: 23 Rating: (0)	Detail pictures Attachment detail.jpg (547 Downloads)

Suggestion To thank Quote Answer

5/2/2020 12:57 AM	Rate (0)
cliff.pennalligen Bronze Member Joined: 7/25/2017 Last visit: 10/31/2024 Posts: 334 Rating: (52)	Hi Andrews13, There is an external application for simulating tags: https://support.industry.siemens.com/cs/document/109760641

Suggestion To thank Quote Answer

5/2/2020 8:20 AM	Rate (0)
Andrews13 Experienced Member Joined: 4/29/2016 Last visit: 10/31/2024 Posts: 23 Rating: (0)	cliff.pennalligen Hi Andrews13, There is an external application for simulating tags: https://support.industry.siemens.com/cs/document/109760641 this application is used to simulate the application tuning it is not for me. I need to simulate a tag script directly in the wincc unified application to determine the maximum value of the rate of climb

Suggestion To thank Quote Answer

5/4/2020 12:00 PM	Rate (0)
cliff.pennalligen Bronze Member Joined: 7/25/2017 Last visit: 10/31/2024 Posts: 334 Rating: (52)	I see three options: Connect a physical PLC and do process simulation using that. Write a script in WinCC Unified that is triggered cyclically to generate the signals. Sounds like hard work. Use the .NET API or the open pipe interface for WinCC Unified to write a 3rd party application to simulate the tags. Also sounds like hard work. If you have a S7-1200 or 1500 PLC lying around, I'd suggest option 1. Or buy one (S7-1211 should be all you need; not expensive).

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC WinCC Unified

Follow us on