Is it possible to call Faceplate from another Faceplate?

Denilson Pegaia

Popup screen

A Faceplate could be called as Popup screen without screen windows

TIP: To call a Faceplate as popup screen from a main screen, create a button and add a java script on an event. Use the snippets: HMIRuntime, screens, Open faceplate in runtime

TIP: the snippet first line is the parameters forwarding. it should match with the faceplate parameter.  Tags should be passed with "{" "}", properties not. 

TIP: the other lines should also configured according (name of the faceplate, position offeset, etc.)

Here there is a second simple example project showing this.

 Is it possible to call Faceplate from another Faceplate in a similar way?

------------------------------------------------------------------------------------------
Split from WinCC Unified – TIP’s for Faceplate.

Thank. This works if both faceplates have the same interface. The OpenFaceplateInPopup method automatically passes parameters from one faceplate to another.

I would be interested to call from one faceplate another, with a different interface. For example, from motor or valve block, call up interlock screen, or display a alarms list or trends.

Konstantin_D

Thank. This works if both faceplates have the same interface. The OpenFaceplateInPopup method automatically passes parameters from one faceplate to another.

I would be interested to call from one faceplate another, with a different interface. For example, from motor or valve block, call up interlock screen, or display a alarms list or trends.

Hi this was possible in the early versions but they took it out apparently, dont know why.

(edited)