1/5/2021 3:24 PM | |
Joined: 9/21/2016 Last visit: 8/17/2023 Posts: 1 Rating: (0) |
After the license and MD are set, is it possible to monitor from the PLC? Which DB could I find the torque values in? DB31...? ------------------------------------------------------------------------------------------ |
Last edited by: CS Moderator at: 01/07/2021 13:47:45New subject after splitting |
|
1/6/2021 5:49 AM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872)
|
Hello SeeAre, Welcome to forum. Please open new topic to post your query & provide detail information about your machine & query. Now to your query, if you have 840D + 611D drive, you do not need any license & the requisite data is easily available. In 840 D system, press MENU SELECT --> MACHINE DATA ----> DRIVE DATA. In this page you can find all requisite details of drive e.g. MD 1722 - Utilization in %, 1728 - Torque setpoint, 1706 - Speed setpoint, 1707 - Actual speed value, 1708 - Smoothed actual current value etc. etc. If you want to read it in PLC, you need NC VAR software via which you can read NC variables in PLC. For more detail information about NC VAR application please refer this FAQ. HTH |
This contribution was helpful to1 thankful Users |
Follow us on