Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

12V DC DI MODULE

Created by: Amit_86 at: 7/10/2013 4:56 PM (18 Replies)

Rating (2)

Thanks 7

Result pages:: |; 1 | 2; |

19 Entries

Entries per page: 10 | all

7/11/2013 12:14 PM	Rate (0)
Amit_86 Platinum Member Joined: 3/18/2008 Last visit: 12/8/2023 Posts: 1750 Rating: (272)	@shish Dear Amit_86, What are you going to get from the weighing system i.e. the total weight in one batch. You can generate it into your PLC instead of taking it from weighing system. I hope you are getting the mA corrosponding to the TPH from the weighing system, and "one batch finish" feedback. Implement a totalizer in the programming, and transfer the total of one batch to the particular address. Reg, Ashish Hello Ashish, The Input is a Totailzer Pulse. On Every pulse it will sense that some kg weigh has passed through the weighing scale. That means on each pulse i have to add some weight (Totalizer). it does not have 4-20 mA Signal.
	VANDE MATARAM.....
Suggestion To thank Quote Answer

7/11/2013 12:38 PM	Rate (0)
@shish Bronze Member Joined: 9/16/2011 Last visit: 6/20/2024 Posts: 291 Rating: (6)	Dear Amit, If the frequency is high and you can not use a relay to get potential free contact. you may try to change the output pulse to one pulse per tonn from one pulse per kg which will reduce the frequency.
	Reg, @shish --- If satisfied with reply, Rate it ! If problem solved, hit THANK !
Suggestion To thank Quote Answer

7/11/2013 12:38 PM	Rate (1)
AMAZINGAHMED Gold Member Joined: 8/27/2006 Last visit: 10/22/2024 Posts: 719 Rating: (88)	Amit_86 @shish Dear Amit_86, What are you going to get from the weighing system i.e. the total weight in one batch. You can generate it into your PLC instead of taking it from weighing system. I hope you are getting the mA corrosponding to the TPH from the weighing system, and "one batch finish" feedback. Implement a totalizer in the programming, and transfer the total of one batch to the particular address. Reg, Ashish Hello Ashish, The Input is a Totailzer Pulse. On Every pulse it will sense that some kg weigh has passed through the weighing scale. That means on each pulse i have to add some weight (Totalizer). it does not have 4-20 mA Signal. You mus either get a new encoder which outputs 24V DC (an I think also 5V DC encoders are supported in FM350), or you can use a solid state relay with power of 12V DC and then connect the 24V DC to the output of the relay then to the High Speed Counter module. The DI modules in siemens sense a "1" signal when the voltage input is >18V DC, then using this signal with Siemens modules will not succeed.
	The more you know, The more you know that you don't know
Suggestion To thank Quote Answer

7/11/2013 12:40 PM	Rate (1)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 11/6/2024 Posts: 4516 Rating: (839)	Amit_86 Ayman Elotaify Amit_86 Hello, Do we have any Digital module available that works on 12V DC in any simatic PLC? Thanks in advance. I an sorry. The answer is No. You can use interposing relays with 12 VDC coil. Hope this helps. Pranav J. Bhagat Amit_86 Hello,Do we have any Digital module available that works on 12V DC in any simatic PLC?Thanks in advance. What is the application. ? Hello, The Application is to read the high speed 12v DC pulse from Weighing Scale to sense the amount of material passed through During One batch Process. Inter posing Relay will not solve the purpose here since it will not be able to read such high frequency pulse & results into chattering of relay. Since , Such module does not exists , i have to look for some alternate solution. Hello, Alternative Solution 1 You can think of opto-coupler with 12VDC input, 24VDC outputs. Then connect the opto-coupler output to HSC or CPU31xC (HSC) IOs. Alternative Solution 2 Siemens have FM-350-1 which can work on 5VDC encoders (HSC). You can use the above solution but with outputs 5VDC. Advantage here, that no extra power supply will be added to this solution. Alternative Solution 3 Consult the weighing System provider, if he have an integrator which can read these signals (+12VDC) and re-transmit it again to PLC in (24VDC). Hope this helps.
	Ayman Elotaify
Suggestion To thank Quote Answer

7/11/2013 1:13 PM	Rate (0)
Amit_86 Platinum Member Joined: 3/18/2008 Last visit: 12/8/2023 Posts: 1750 Rating: (272)	Hello Friends, Thanks for your all valuabe suggestion. I will get back to this after discussion with the Client.
	VANDE MATARAM.....
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Ton Verra Ayman Elotaify

7/12/2013 12:03 PM	Rate (0)
SMHZ Bronze Member Joined: 10/19/2012 Last visit: 4/17/2022 Posts: 315 Rating: (9)	Ayman Elotaify Amit_86 Ayman Elotaify Amit_86 Hello, Do we have any Digital module available that works on 12V DC in any simatic PLC? Thanks in advance. I an sorry. The answer is No. You can use interposing relays with 12 VDC coil. Hope this helps. Pranav J. Bhagat Amit_86 Hello,Do we have any Digital module available that works on 12V DC in any simatic PLC?Thanks in advance. What is the application. ? Hello, The Application is to read the high speed 12v DC pulse from Weighing Scale to sense the amount of material passed through During One batch Process. Inter posing Relay will not solve the purpose here since it will not be able to read such high frequency pulse & results into chattering of relay. Since , Such module does not exists , i have to look for some alternate solution. Hello, Alternative Solution 1 You can think of opto-coupler with 12VDC input, 24VDC outputs. Then connect the opto-coupler output to HSC or CPU31xC (HSC) IOs. Alternative Solution 2 Siemens have FM-350-1 which can work on 5VDC encoders (HSC). You can use the above solution but with outputs 5VDC. Advantage here, that no extra power supply will be added to this solution. Alternative Solution 3 Consult the weighing System provider, if he have an integrator which can read these signals (+12VDC) and re-transmit it again to PLC in (24VDC). Hope this helps. This i think will solve the problem. .

Suggestion To thank Quote Answer

7/12/2013 12:36 PM	Rate (0)
Navnag Platinum Member Joined: 11/21/2007 Last visit: 9/25/2024 Posts: 2325 Rating: (308)	Ayman Elotaify Amit_86 Ayman Elotaify Amit_86 Hello, Do we have any Digital module available that works on 12V DC in any simatic PLC? Thanks in advance. I an sorry. The answer is No. You can use interposing relays with 12 VDC coil. Hope this helps. Pranav J. Bhagat Amit_86 Hello,Do we have any Digital module available that works on 12V DC in any simatic PLC?Thanks in advance. What is the application. ? Hello, The Application is to read the high speed 12v DC pulse from Weighing Scale to sense the amount of material passed through During One batch Process. Inter posing Relay will not solve the purpose here since it will not be able to read such high frequency pulse & results into chattering of relay. Since , Such module does not exists , i have to look for some alternate solution. Hello, Alternative Solution 1 You can think of opto-coupler with 12VDC input, 24VDC outputs. Then connect the opto-coupler output to HSC or CPU31xC (HSC) IOs. Alternative Solution 2 Siemens have FM-350-1 which can work on 5VDC encoders (HSC). You can use the above solution but with outputs 5VDC. Advantage here, that no extra power supply will be added to this solution. Alternative Solution 3 Consult the weighing System provider, if he have an integrator which can read these signals (+12VDC) and re-transmit it again to PLC in (24VDC). Hope this helps. Hello Amit_86 http://www.ebay.com/itm/Phoenix-Contact-Opto-Coupler-EMG-10-OV-12DC-24DC-1-12vdc-In-24vdc-Out-/130588387197 I think this is what you need ! There are many more similar options from Phoenix , Murr and others. Cheers Navnag
	Last edited by: Navnag at: 7/12/2013 1:10 PM There is no such thing as the last bug in a program There are no stubborn bugs, There are only stubborn Debuggers.
Suggestion To thank Quote Answer

7/12/2013 2:42 PM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 10/23/2024 Posts: 4620 Rating: (708)	Hello Navnag, Only a clarification,Amit_86 spoke of high frequency, this maximum is 500 HZ, I think but do not know because he has not yet explained what frequency but I think it is higher. Maybe this is better Data Sheet - Alstronthis is 100 KHz.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Amit_86

7/12/2013 4:04 PM	Rate (0)
Navnag Platinum Member Joined: 11/21/2007 Last visit: 9/25/2024 Posts: 2325 Rating: (308)	Thanks Ste39 I assumed a speed of a few Hz Max only as he is looking for a DI Module and not a counter module. Anyway he can choose whichever is more suitable for his application. Cheers Navnag
	There is no such thing as the last bug in a program There are no stubborn bugs, There are only stubborn Debuggers.
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Amit_86 Ste39

|

Share this page:

Share this page on...

Follow us on