Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

A017 SAFE OFF alarm active, IGD Repair

Created by: Rejjal at: 2/14/2018 9:46 PM (24 Replies)

Rating (3)

Thanks 6

Result pages:: |; 1 | 2 | 3; |

25 Entries

Entries per page: 10 | 20 | all

2/14/2018 9:46 PM	Rate (0)
Rejjal Advanced Member Joined: 7/5/2009 Last visit: 6/27/2024 Posts: 76 Rating: (8)	Hi I face A017 Alarm (SAFE OFF alarm active) on SIMOVERT VC (6SE7031-8EF60-Z) in spit of our drive doesn't have K80 Option I contacted with our local Siemens for new IGD, They inform me that this board not available anymore problem solved after replacing IGD board (6SE7031-8EF84-1JC1) I need help urgent to repair IGD damaged board usually this kind of problem should be from the capacitors or photocouplers is there any expert can advice me which exactly part is responsible for A017 Alarm? IGD Board photo attached do you advice me to change IC W99120322 or A1458 Photocoupler ? Regards Attachment IGD board.JPG (1397 Downloads)
	You can only go as far as you push
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ragucrane

2/15/2018 9:23 AM	Rate (0)
MAZENJER Silver Member Joined: 8/31/2013 Last visit: 11/8/2024 Posts: 607 Rating: (41)	Hello If You connect with siemens Germany They could produced new one for you
	Warm Regards MAZENJER
Suggestion To thank Quote Answer

2/15/2018 10:17 AM	Rate (0)
Rejjal Advanced Member Joined: 7/5/2009 Last visit: 6/27/2024 Posts: 76 Rating: (8)	Dear Mazen thanks for your advice our local Siemens gave us this option but it'll take long time I hope to find some one who can help me to repair our IGD damaged board Regards
	You can only go as far as you push
Suggestion To thank Quote Answer

2/18/2018 9:24 AM	Rate (2)
Rejjal Advanced Member Joined: 7/5/2009 Last visit: 6/27/2024 Posts: 76 Rating: (8)	Good news, I success to repair damaged IGD board it's SMD transistor blocking the 22vdc signal I forced to draw and measuring the circuit completely it take 2 days but next time any problem in the IGD board will take 3 minute Regards Rejjal Attachment 1JC1.pdf (1631 Downloads)
	You can only go as far as you push
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users mindware Kameran2

4/11/2018 10:39 PM	Rate (0)
Serg11 Posts: 1 Rating: (0)	Hi! Congrats! Could you tell me wich transistor did you change? Regards.
Serg11 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

7/13/2018 11:41 PM	Rate (0)
Rejjal Advanced Member Joined: 7/5/2009 Last visit: 6/27/2024 Posts: 76 Rating: (8)	Hi Serg sorry for delay I just see your reply it's AC rectifier transistor show me your damaged IGD board photo to help you better Regards
	You can only go as far as you push
Suggestion To thank Quote Answer

7/22/2018 4:43 PM	Rate (0)
Eldar_esmu Regular Member Joined: 7/22/2018 Last visit: 4/23/2024 Posts: 28 Rating: (0)	Hi. Please help me. How can i disconnected this is board? And how can i chek this is board? I have any problem with simovert master drive.

Suggestion To thank Quote Answer

8/8/2018 12:48 PM	Rate (0)
Rejjal Advanced Member Joined: 7/5/2009 Last visit: 6/27/2024 Posts: 76 Rating: (8)	Hi Eldar_esmu which drive type do you have compact or chassis ? chassis drive photo attached If chassis type you have to remove capacitors unit first then you'll find IGD board behind Regards Rejjal Attachment Chassis drive photo.jpg (1118 Downloads)
	You can only go as far as you push
Suggestion To thank Quote Answer

1/16/2019 7:05 AM	Rate (0)
STINapedy Posts: 1 Rating: (0)	Hi Rejjal, Could You show me which SMD transistor you had damaged? I have the same problem on a simillar IGD1 board (6SE7031-5EF84-1JC1). Do you have a multi-slot socket described?
STINapedy Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

3/18/2019 1:14 PM	Rate (0)
Rejjal Advanced Member Joined: 7/5/2009 Last visit: 6/27/2024 Posts: 76 Rating: (8)	Hi STI... sorry for delay I just see your reply it's AC rectifier transistor Regards
	You can only go as far as you push
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users VeniGI

|

Share this page:

Share this page on...

Follow us on