6/19/2024 6:31 AM | |
Joined: 4/28/2015 Last visit: 8/27/2024 Posts: 358 Rating:
|
Hi At this point I would normally point you to the release notes for your version, but as previously explained they do not make any mention of TIA (See attached). Also with regards to V4.95 (SP2) please also be aware that some HMI based hardware restrictions came in when working with older generation hardware which you may want to consider if coming up from an old version (TCU.1 and HT8.1) see release below): https://support.industry.siemens.com/cs/document/109801399/sinumerik-840d-sl-sales-and-delivery-release-cnc-software-sw-4-95?dti=0&lc=en-US 840Dsl will enter cancellation phase in October this year after which you will only be able to purchase hardware as spare parts, no longer for new installation / applications: https://support.industry.siemens.com/cs/document/109824419/phase-out-announcement-of-sinumerik-840d-sl?dti=0&lc=en-US Hope this helps Luke Attachmentsiemense_CNC_45SP6HF3.pdf (93 Downloads) |
Follow us on