Problem is that i cant find default adress. 

Can u export here some flows which is working?

It is necessary to add another block. Or the export I sent is ok 

I've got the same problem.. Is it necessary to create some .confg file in /etc in Simatic IOT2040 ? I've seen that in some tutorials. When i tried to send data from node red on IOT2040 to Ubidots (free cloud) everything went well. I don't know where could be problem. 

Best regards

[{"id":"2e32d19b.710c4e","type":"inject","z":"f1ee31b9.60944","name":"true","topic":"","payload":"true","payloadType":"bool","repeat":"","crontab":"","once":false,"x":330,"y":2140,"wires":[["2bfd8d91.6aeb32"]]},{"id":"95fb67dc.10dc48","type":"inject","z":"f1ee31b9.60944","name":"false","topic":"","payload":"false","payloadType":"bool","repeat":"","crontab":"","once":false,"x":328,"y":2219,"wires":[["2bfd8d91.6aeb32"]]},{"id":"2bfd8d91.6aeb32","type":"function","z":"f1ee31b9.60944","name":"","func":"var a=msg.payload;\n\nif(a===true){\n    msg.payload=\"1\";\n}else{\n    msg.payload=\"0\";\n}\nreturn msg;","outputs":1,"noerr":0,"x":534,"y":2178,"wires":[["664612e5.63035c","e6555662.e1bbd8"]]},{"id":"664612e5.63035c","type":"debug","z":"f1ee31b9.60944","name":"True/False","active":true,"console":"false","complete":"payload","x":757.1428571428571,"y":2177.142857142857,"wires":[]},{"id":"e6555662.e1bbd8","type":"wiotp out","z":"f1ee31b9.60944","authType":"d","qs":"false","qsDeviceId":"","deviceKey":"5bf12076.4040a","deviceType":"","deviceId":"","event":"event","format":"json","qos":"1","name":"","x":762.7734870910645,"y":2233.1877460479736,"wires":[]},{"id":"5bf12076.4040a","type":"wiotp-credentials","z":"","name":"","org":"rgan24","serverName":"rgan24.messaging.internetofthings.ibmcloud.com","devType":"IoT_Marek","devId":"PLC_Marek","keepalive":"60","cleansession":true,"tls":"","usetls":false}]

Still doesnt work  

Hi :) 

I didnt read your msg but yes. Problem was in wrong time. 

Also with wrong time i  wasnt able to install some modules withotu ERR. 

SO!!!!!!! Set the time first guys :) 

Hello, I am tryin to connect my IoT2020 to Watson IoT but it says to me this:

"[wiot:connectionPool:getClient] Error: certificate is not yet valid"

In an IoT2040 works, but not for me, anyone knows why?

Regards.

bergmanu

Hi,

did you check the system time of your IOT?

Best regards!

 It works now! I have set date and time and now its connected.

Thank you so much.

Regards.

Hi,

I got this error when I try to install node-red IBM Watson IoT node. Any help will be appreciated

Thank you so much for your reply. It works. [snip]

Hello Bergmanu,

Can you share the step by step procedure to transfer data from Node Red to IBM Cloud so that i can view it on the Cloud dashboard.

Hi Shane,

please, have a look on the first page from this topic. The user bergmanu wrote following:

bergmanu

This Application Example shows how to send data to the IBM Watson IoT Platform using node-red.

Attachment

IBM_Watson_node-red_V1.0.pdf(1780 Downloads)

Best regards!