9/15/2021 5:47 AM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872)
|
Open & check in PLC project hardware configuration, you should see IM modules connected & their address. |
9/15/2021 12:15 PM | |
Joined: 9/6/2014 Last visit: 5/1/2024 Posts: 209 Rating: (6) |
I make a snapshot from my labtop on closet . |
9/15/2021 12:23 PM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872)
|
Could you please attach your PLC project here? |
9/15/2021 12:30 PM | |
Joined: 9/6/2014 Last visit: 5/1/2024 Posts: 209 Rating: (6) |
HI I studied all replies and PISCEAN 2010 has some questions : Is this new machine under commissioning or running machine? yes machine working not commissioning . Have you deveopled logic? no i'm researching some problems related to some accessories Which I/Os are connected to IM modules? some limitswicthes and some relaies . Which Step 7 you have? V5.6+SP2 with SINUMERIK Add-on Which intefrace/hardware you have to connected NCU? I connect with MPI Thanks |
Last edited by: SABALANKOOH at: 09/15/2021 12:58:08 |
|
9/15/2021 12:56 PM | |
Joined: 9/6/2014 Last visit: 5/1/2024 Posts: 209 Rating: (6) |
sure |
Last edited by: SABALANKOOH at: 10/02/2021 06:02:38 |
|
9/16/2021 11:57 AM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872)
|
What do you confuse about? What more information you want? |
9/16/2021 12:22 PM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872)
|
Which is NCU? Which adapter used? |
9/18/2021 5:38 AM | |
Joined: 9/6/2014 Last visit: 5/1/2024 Posts: 209 Rating: (6) |
HI I'm be very happy for your following and appreciate . IF you think pc adapter have Possible problem I can try with PG . So I have another question , why SIMATIC MANAGER exist on controller can't showing ? IS there any special adjusting that maybe I didn't know ? AttachmentW.zip (147 Downloads) |
9/18/2021 7:37 AM | |
Joined: 9/6/2014 Last visit: 5/1/2024 Posts: 209 Rating: (6) |
I did , but .. see attach please |
9/18/2021 7:48 AM | |
Joined: 9/6/2014 Last visit: 5/1/2024 Posts: 209 Rating: (6) |
sorry I must check |
Last edited by: SABALANKOOH at: 09/18/2021 07:50:59 |
|
9/18/2021 8:19 AM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872)
|
It should work. If not, contact your OEM or nearest Siemens support center. |
9/18/2021 1:11 PM | |
Joined: 9/6/2014 Last visit: 5/1/2024 Posts: 209 Rating: (6) |
I strove for complete uploading and faced with attached ! |
9/20/2021 2:59 PM | |
Joined: 9/6/2014 Last visit: 5/1/2024 Posts: 209 Rating: (6) |
Hi After your insist for using X127 , I many tried for connecting and change my cable . Suddenly I won for uploading but some messages appears !! For assurance of good condition at adjustment of interface parameters I got differ conclusion . see encloser plz . So why I couldn't for reconnection and which adjustments are true ? AttachmentDe.zip (186 Downloads) |