Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to setup the IOT2050 with Example Image

Created by: bergmanu at: 6/16/2020 4:38 PM (21 Replies)

Rating (6)

Thanks 17

Result pages:: |; 1 | 2 | 3; |

22 Entries

Entries per page: 10 | 20 | all

6/16/2020 4:38 PM	Rate (5)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	Hi, finally we have the IOT2050 Setting Up for the Example Image ready for upload. It describes the intial setup of the IOT2050, from writing the example image to a SD card to install some packages with apt. P.S: You can find a japanese version of document version 1.0 here Best regards! Attachment SIMATIC_IOT2050_Setting_up_V1.2.1.pdf (5615 Downloads)
	Last edited by: bergmanu at: 06/17/2020 13:18:34 cahnged PDF - links can be pressed now Last edited by: bergmanu at: 06/24/2020 14:33:23 Example Image is online now Last edited by: bergmanu at: 01/11/2021 12:24:15 Last edited by: bergmanu at: 07/26/2021 16:40:13 Last edited by: bergmanu at: 09/29/2021 10:46:21 Last edited by: bergmanu at: 09/29/2021 11:11:31 updated document to V1.1 --> differences with Example Image V1.1.1 compared to V1.0.2 Last edited by: bergmanu at: 09/30/2021 13:02:20 Last edited by: bergmanu at: 02/17/2022 09:57:37 updated document to V1.2 - add changing boot order and how to use serial connection Last edited by: bergmanu at: 03/09/2023 07:03:47 Changed to version 1.2.1 - added " " to changing bootorder via UART Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer
This contribution was helpful to 11 thankful Users Jen_Moderator tkn.vmo hayyanonline1 anasnadakkavil 关你屁事 FürBA hahneT Spawnsen_ DanielXu2025 mantelec@etn.fr U_4c97b298-a545-4...

2/17/2022 10:00 AM	Rate (1)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	Hi all, please check out the new version 1.2 of the Setting Up document, there is important information added: How to change boot order and especially the new syntax in Example Image V1.2.1 How to use UART cable to establish a serial connection This information has been somewhere in some forum threads and the IndOS Setting Up so far, but not in this document. Now it is Best regards!
	Last edited by: bergmanu at: 02/17/2022 10:01:20 Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Jen_Moderator hahneT

7/19/2022 10:00 AM	Rate (0)
Pertergroft Member Joined: 7/19/2022 Last visit: 9/16/2022 Posts: 1 Rating: (0)	Get the SIMATIC IOT2050 SD-Card example image from Siemens Support Site (you will need to register as a user, registration is free). Download IOT2050_Example_Image_V1.0.2.zip (or a more recent version available). This is Siemens Industrial OS based on Debian. Use Win32 Disk Imager to create a bootable Micro-SD card. More details about how to install the OS are in SIMATIC IOT2050 Setting up document on the support website. Insert this SD card in the correct slot. Connect the IOT 2050 using the correct LAN port. If your local network IP Address range is not 192.168.200.xxx, then it is best to use LAN port 2. LAN port 2 will use a DHCP address from your router. Power up your IOT 2050. It needs 24V DC input. Most industrial automation stores sell this. Siemens also has a lot of industrial power supplies to choose from. We will update this post with a few part numbers that you can search for. If using DHCP, connect to your router and find the IP address for IOT 2050 Use Putty to connect to IOT 2050 using SSH this IP address. Default root password is root. Note: the OS does not include sudo command. If a static IP is required, configure the network by editing the file /etc/network/interfaces to make this change. Regards, Peter

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users U_4c97b298-a545-4...

7/28/2022 3:27 PM	Rate (0)
Raique Member Joined: 6/17/2021 Last visit: 4/18/2024 Posts: 3 Rating: (0)	Hi, i have dowloaded v1.2.2 but it also have a download for Open Source Software, what does it intend for? what can i do with this? thanks a lot. best regards!

Suggestion To thank Quote Answer

7/29/2022 8:36 AM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	Hi, you do not need the Open Source Software for any technical reason. We are required to publish this, this is mandatory when someone publishes software, which has Open Source components. All of those components need to be published as well. Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer

9/16/2022 7:56 AM	Rate (0)
jackvlmt Member Joined: 2/11/2022 Last visit: 7/12/2024 Posts: 1 Rating: (0)	Hello I followed the guide step by step, but seems that win32disk not produce a good sd card. When i put the sd into the iot2050 and start the device i see the stat led red. Could you suggest something? Thank you Jack

Suggestion To thank Quote Answer

9/20/2022 2:28 PM	Rate (0)
AutoGen_5272580 Member Joined: 7/13/2017 Last visit: 5/16/2023 Posts: 10 Rating: (0)	I created an image with IOT2050_Example_Image_V1.1.1.img on the SD card. The IOT2050 started and as for the login. I used user root, password root, as it said in the description, aber it did not work. Same with image IOT2050_Example_Image_V1.2.2.img. Can somebody tell me the new root password?

Suggestion To thank Quote Answer

9/21/2022 3:14 PM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	Hi, jackvlmt Hello I followed the guide step by step, but seems that win32disk not produce a good sd card. When i put the sd into the iot2050 and start the device i see the stat led red. Could you suggest something? Thank you Jack which Example Image version are you using and which FS does your device have? Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer

9/21/2022 3:16 PM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	Hi AutoGen_5272580 I created an image with IOT2050_Example_Image_V1.1.1.img on the SD card. The IOT2050 started and as for the login. I used user root, password root, as it said in the description, aber it did not work. Same with image IOT2050_Example_Image_V1.2.2.img. Can somebody tell me the new root password? the password is still the same. Are you using an IOT2050 Advanced? Maybe it boots from the eMMc and the image there has another password. Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users DraganZiv

9/22/2022 7:22 AM	Rate (0)
AutoGen_5272580 Member Joined: 7/13/2017 Last visit: 5/16/2023 Posts: 10 Rating: (0)	Hi, thank you very much for the quick reply. Yes, I you use an IOT2050 Advanced and it boots from Micro SD card. I followed exactly the instructions from SIMATIC_IOT2050_Setting_up_V1.2.pdf. There it says, user root, password root. I tried both, connecting the display directly to the IOT2050 and via ethernet and putty. In both cases, the password did not work. Any suggestions were I can get the right password? Best regards
	Last edited by: AutoGen_5272580 at: 09/22/2022 07:22:51 Last edited by: AutoGen_5272580 at: 09/22/2022 10:04:11 Last edited by: AutoGen_5272580 at: 09/22/2022 13:52:32
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users U_6529af3d-8002-4...

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC IOT2050 How To

Follow us on