2/9/2009 5:08 PM | |
Joined: 3/21/2006 Last visit: 4/25/2024 Posts: 10228 Rating: (1181) |
Hello I suggest you to contact with Siemens local center in your place. Look at COM ET 200/COM ET 200/MS-DOS Configuration Tools to Be Discontinued
But maybe someone has this software in his archves. I'll also try to find in mine. regards |
This contribution was helpful to1 thankful Users |
2/9/2009 6:31 PM | |
Joined: 3/21/2006 Last visit: 4/25/2024 Posts: 10228 Rating: (1181) |
Hello I found ET200 for Step5. Maybe will be useful for you. This is not DOS version. regards AttachmentSimatic_S5_ET200.ZIP (887 Downloads) |
This contribution was helpful to2 thankful Users |
2/15/2009 1:18 PM | |
Joined: 6/14/2008 Last visit: 1/25/2022 Posts: 65 Rating: (3) |
Hello, Mr. UMENCHO I forgot. I start "STEP5 / ST V7.23" on a personal computer. The hint was shown in this screen. It is displayed as "PG 6x5." This "COM ET200" is expected. I do not have the knowledge of "PG 6x5." AttachmentMELSEC.pdf (543 Downloads) |
2/16/2009 2:59 PM | |
Joined: 3/21/2006 Last visit: 4/25/2024 Posts: 10228 Rating: (1181) |
Hello To continue with Step5 - Look at Compatibility of STEP 5 versions with Windows operating system .You have only a few possibilities - Step5 v7.1x and hope that COMET200 will works properly under Windows 98, NT or 2000. PC wih Windows 95, I think isn't be possible to find. I'll try to find this version in my archves and test it. If I were you, I'll upgrade immediately this system, even with other grade. I know that at the moment isn't be perfect time for "loose" extra money, but in your case... regards |
2/17/2009 7:28 PM | |
Joined: 6/14/2008 Last visit: 1/25/2022 Posts: 65 Rating: (3) |
hello I got the hint for solution. https://support.automation.siemens.com/WW/llisapi.dll/9715828?func=ll&objId=9715828&objAction=csView&nodeid0=10805348&lang=en&siteid=cseus&aktprim=0&extranet=standard&viewreg=WW&load=content&prodLstObjId=4060685&subtype=133400 Appended PDF is seen. I try this hint on reference. Thank you. Attachmentmelsec1.pdf (332 Downloads) |
Last edited by: melsec- at: 2/17/2009 7:42 PMLast edited by: melsec- at: 2/17/2009 7:32 PM |
|
2/23/2009 8:21 PM | |
Joined: 3/21/2006 Last visit: 4/25/2024 Posts: 10228 Rating: (1181) |
Hello I am trying to find Step5 v6.6. If I find it, I'll let you know. regards |
2/25/2009 12:31 PM | |
Joined: 6/14/2008 Last visit: 1/25/2022 Posts: 65 Rating: (3) |
Thank you I am impressed by your action. I am thankful to you. |
4/4/2009 9:16 AM | |
Joined: 5/26/2007 Last visit: 6/6/2024 Posts: 127 Rating: (3) |
i have my screen shot using virtual machine to open comet200. i have a strange situation. i have a PG740 pentium1, with win95. when i open this comet200. i got a blue screen and the whole computer stop. is this comet200 cannot be open by win95? anybody had experience? AttachmentUsingVirtual.zip (298 Downloads) |
4/6/2009 6:24 AM | |
Joined: 5/26/2007 Last visit: 6/6/2024 Posts: 127 Rating: (3) |
Dear Umencho, Thanks for your tips. the problem is i don't have s5 v6.6 too bad. |
4/17/2009 5:47 PM | |
Joined: 6/14/2008 Last visit: 1/25/2022 Posts: 65 Rating: (3) |
Mr. sulung, hello About the problem which you have You are investigating the method of writing the binary file generated by COMET200 in EPROM. Although I have experienced neither, it is proposed. Proposal 1 Start→simatic→STEP5→S5Eprom Proposal 2 STEP5→File→project→Set→6.EPROM Each item is set up. Attachmentmelsec.pdf (243 Downloads) |
This contribution was helpful to1 thankful Users |
1/28/2010 3:33 AM | |
Joined: 6/14/2008 Last visit: 1/25/2022 Posts: 65 Rating: (3) |
Hello!! I got "PG710plus." The monitor of "PG710plus" does not function. Instantly, "COM ET200" introduced by this thread was installed. I am thankful to you who helped. Attachmentpg710plus_et200.pdf (390 Downloads) |
2/12/2010 9:15 AM | |
Joined: 6/14/2008 Last visit: 1/25/2022 Posts: 65 Rating: (3) |
Hello I am studying Profibus by IM308-B.
PG710Plus RACK 6ES5700-2LA11 ET200U 6ES5318-8MB13 ←By COMET200, it is set as Station nummber:3.
OB1
F1: Entry of ET200 system parameter
From these contents, it saved C:TEST01ET.200.
On the screen of "F3 :Transfer functions" Transfer partner: E(E)PROM / File Just as it inputs 412 A display of "Wrong submodule or no submodule plugged in" comes out, and it does not progress previously. STEP5 -- EPROM -- it can write in
TEST01BN.200 recorded to the floppy disk, STEP5 programfile/binaryfile
It has not worked by such situation. Is a setup by COMET200 wrong? What is insufficient, as for me? Attachmentmelsecprofitest.zip (319 Downloads) |
Last edited by: melsec- at: 2/13/2010 2:55 AM |
|