7/1/2021 8:39 AM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872)
|
Please check C axis MD 30320, 30330, 30340, 30455, 30460, 30465, 30500, 30503, values & report here. |
7/1/2021 11:10 AM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872)
|
4H or 4D (bit 2) No 4 bit |
Last edited by: PISCEAN 2010 at: 07/01/2021 11:10:47 |
|
7/1/2021 12:26 PM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872)
|
Try below G90 POS[C] = 0 F1000 |
7/1/2021 1:10 PM | |
Joined: 3/12/2015 Last visit: 5/16/2024 Posts: 533 Rating: (15) |
The same thing happens
|
7/1/2021 1:20 PM | |
Joined: 3/12/2015 Last visit: 5/16/2024 Posts: 533 Rating: (15) |
I did a power on and after putting in the code in the mda I got this......... |
7/1/2021 1:46 PM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872)
|
Have you referenced C axis & then tried? |
12/11/2021 7:24 AM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872)
|
Look forward for your feedback. All the best. |
12/14/2021 9:23 AM | |
Joined: 3/12/2015 Last visit: 5/16/2024 Posts: 533 Rating: (15) |
Here is a small video of my problem
AttachmentVID-20211214-WA0006.mov (237 Downloads) |