Skip to Content

support.automation.siemens.com | Technical Forum | Thursday, May 19, 2022 12:59:37 AM

Print

Simatic IOT2040 node red Hmac Sha256 node output value

Created by: DipikaSamanta at: 11/25/2021 5:55 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

11/25/2021 5:55 AM	Rate (0)
DipikaSamanta Regular Member Joined: 4/16/2021 Last visit: 3/2/2022 Posts: 15 Rating: (0)	Hello I am using Hmac Sha256 node in node red flow. Previously I was getting different output values in debug node for different messages. Recently I have been getting same output values for any message from Hmac Sha256 node. Can anyone please explain to me why suddenly Hmac Sha256 node is showing same values in output?

Suggestion To thank Quote Answer

11/29/2021 11:15 AM	Rate (0)
bergmanu Platinum Expert Joined: 4/28/2015 Last visit: 5/18/2022 Posts: 2787 Rating: (344)	Hi, I guess you are talking about node-red-contrib-simple-crypot? I have never used this node and do not have any experience with it. You could send your flow to investigate it, but I can't promise to find something. Usually I would have pointed to the github page of the node, but there is none. And I don't know how to report issues on their npm page. Best regards!

Suggestion To thank Quote Answer

11/29/2021 11:33 AM	Rate (0)
DipikaSamanta Regular Member Joined: 4/16/2021 Last visit: 3/2/2022 Posts: 15 Rating: (0)	Hello Thanks for your reply. I have solved this issue by restarting the Simatic Iot2040 device.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users bergmanu