5/17/2016 12:03 PM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872) |
Please check the axis MD 32110 value. Change it to -1 & check. |
5/17/2016 1:22 PM | |
Posts: 15 Rating: (1) |
In MD32110 was a 1. We have tried -1 and 0. Without success, the Motor turns further on in one direction. |
5/20/2016 8:39 AM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872) |
What does this motor do? (Application of this motor) |
5/20/2016 8:50 AM | |
Posts: 15 Rating: (1) |
this is a gripper positioning Motor. which turns the part. 0-90° |
Last edited by: Rubi 1234 at: 5/20/2016 9:06:22 AM |
|
5/20/2016 11:09 AM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872) |
After replacement of motor, control card etc, how to carried out referencing of this axis? |
5/20/2016 11:53 AM | |
Posts: 15 Rating: (1) |
After replacement: Encoder referencing MD34210 0 - turned to 2 MD34200 1 and 34090 current Position. |
5/20/2016 12:23 PM | |
Joined: 2/6/2014 Last visit: 7/4/2022 Posts: 236 Rating: (3) |
Is there a brake in this motor / axis ? |
5/20/2016 12:34 PM | |
Posts: 15 Rating: (1) |
yes, a 24V brake, this is working. |
5/20/2016 3:56 PM | |
Posts: 15 Rating: (1) |
Problem is jog Mode doesn't work. Motor Starts before always. |
5/21/2016 2:32 PM | |
Posts: 15 Rating: (1) |
To Change the UVW we have tried. It's the same. It is possible that the axis goes purpously controlled by the safety test always in one direction?? |
5/22/2016 5:28 AM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872) |
Could you please attach PLC & series start up back up here? Also please let me know the faulty axis number. |
Follow us on