Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

unable to edit the station configuration editor in PVS7 V7

Created by: MrJugnu at: 12/14/2009 1:20 PM (10 Replies)

Rating (1)

Thanks 0

Result pages:: |; 1 | 2; |

11 Entries

Entries per page: 10 | all

12/14/2009 1:20 PM	Rate (0)
MrJugnu Posts: 7 Rating: (0)	unable to edit the station configuration editor in PVS7 V7. keys are gray (unhiglighted). i am not able to add any application.
MrJugnu Posts: 7 Rating: (0)	Last edited by: O_Moderator at: 12/14/2009 1:58 PM new subject after transferring question to the conferences
Suggestion To thank Quote Answer

12/17/2009 9:57 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi could you please post a screenshot in the forum? Does this happen with a new project as well or on a different PC as well? nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

1/4/2010 2:21 PM	Rate (0)
zerepegro Posts: 183 Rating: (8)	Hi Shaikh Hamid; Could you explain how did you install the software?There was some simatic softwarebefore?
zerepegro Posts: 183 Rating: (8)
Suggestion To thank Quote Answer

5/8/2013 8:12 PM	Rate (0)
MS AGUILAR Member Joined: 4/30/2012 Last visit: 7/9/2024 Posts: 1 Rating: (0)	HI I am having the exact same problem but in V8.0, the installation is correct but i can't modify or edit Station Configuration Editor and the add/edit/delete buttons are blocked. Can you please tell me how did you solve the problem?? Thank you a lot

Suggestion To thank Quote Answer

5/14/2013 3:15 PM	Rate (1)
Silent Bob Posts: 836 Rating: (100)	Hi. Adding is only possible in an empty row and deleting only on a row thats not empty... but I guess you already tried this. Did you try to make the configuration over the Simatic Manager? (Make configuration for PC in Simatic Manager, right click in Simatic Manager on the PC station > PLC> Configure > Configure).
Silent Bob Posts: 836 Rating: (100)
Suggestion To thank Quote Answer

1/17/2014 1:08 PM	Rate (0)
Rudi1234 Posts: 12 Rating: (1)	Hi guys Have anyone solved this issue? The same thing is happening to me on WinCC V7.2. I've reinstalled SIMATIC NET, but it still doesn't work. I've imported a .xdb file with the configuration. It imports the IE General card, but then I can still not make any changes to it or add components. The log says that a service needed by Station Config did not start, but I compared all services to a PC whithout the problem, and they are the same. Any suggestions?
Rudi1234 Posts: 12 Rating: (1)
Suggestion To thank Quote Answer

1/14/2016 11:09 AM	Rate (0)
banconi Silver Member Joined: 3/19/2010 Last visit: 10/26/2024 Posts: 438 Rating: (12)	Same here, what is going on? Does anyone know what is happening? How can we start using Station configuration?

Suggestion To thank Quote Answer

1/14/2016 2:16 PM	Rate (0)
mark1507 Platinum Expert Joined: 6/23/2008 Last visit: 11/13/2024 Posts: 1168 Rating: (283)	Hello banconi, what is the siutuation when you are logged on to windows as Administrator?
	"Expert" does not necessarily mean Siemens employee. Please cross-check your requirements always with official Siemens documentation. Also "Experts" are pleased about feedback. Please don't send support requests as PM. Questioners who don't follow up their thread will be put to my list of users to be ignored.
Suggestion To thank Quote Answer

2/1/2016 3:56 PM	Rate (0)
pradhan135 Bronze Member Joined: 1/27/2012 Last visit: 6/20/2024 Posts: 84 Rating: (1)	I have also same problem.. I can not edit or delete or download stations in station configuration editor. It gives error: "could not log off the proxy with index 125 from the softnet" & "could not log off the proxy with index 2 from the softnet" 1- IE General 2- WinCC Appl. 125- Station manager

Suggestion To thank Quote Answer

2/2/2016 2:54 PM	Rate (0)
pradhan135 Bronze Member Joined: 1/27/2012 Last visit: 6/20/2024 Posts: 84 Rating: (1)	I have solved the problem by re-installing all the software. I notice that even if i uninstalled all the software and installed them again, the problem was still there. After that I uninstalled all the software deleted all the folders from C:\Program file(86)\Siemens and C:\ProgramData\Siemens. I have also deleted the Wincc project that was previously downloaded from ES. Then I installed all the software. And I could download the configuration and project. I have solved my problem.... Although, it was very surprising for me that after fresh installation in both the above case (without deleting folder and with deleting folders) I can see all the 3 components in the Station manager, even if i have not download any configuration to the PC satation.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on