Navigation
Configure MeasuringInput for an external digital signal
Created by: maquina de combate at: 9/1/2024 4:41 PM (1 Replies)
Rating 
Thanks 0
2 Entries
| 9/1/2024 4:41 PM | |
Joined: 11/14/2017 Last visit: 10/7/2024 Posts: 3 Rating:
|
Hello, I configured the application to work with V90 without the printing mark and it works normally. However, I don't know how to configure MeasuringInput for an external digital signal, for example an expansion card or a remote. ------------------------------------------------------------------------------------------ |
Last edited by: maquina de combate at: 09/01/2024 16:47:09Last edited by: Moderator_Lan at: 09/02/2024 10:03:09New subject after splitting |
|
Follow us on