Navigation

How can set the Limits in the I/O Fields using a Script?

Created by: AutoGen_8376141 at: 4/22/2021 11:30 AM (1 Replies)

4/22/2021 11:30 AM	Rate (0)
AutoGen_8376141 Member Joined: 4/4/2019 Last visit: 4/22/2021 Posts: 1 Rating: (0)	Dear murof , can you give an example of how you can set the Limits in the I/O Fields using a Script? I have the same issue that I can't put the range to a specific tag using another tag. I want to see the function using a script that I could use to do this. with best regards ------------------------------------------------------------------------------------------ Split from WinCC RT Professional V15.1 plc tag connection range.
	Last edited by: Jen_Moderator at: 04/22/2021 12:42:37 New subject after splitting
Suggestion To thank Quote Answer

5/7/2021 11:42 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 11/19/2024 Posts: 14197 Rating: (1775)	Hello if you work with WinCC Professional Runtime and in VB Script and the Script runs in the same Screen then you can use something like this: ScreenItems("NameOfIOFieldObject").UpperLimitValue = 123 Is this what you are looking for? (This will NOT work for WInCC Comfort/Advanced) Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer