Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

absolute encoder interface

Created by: vivid5 at: 6/1/2021 10:40 AM (7 Replies)

Rating (2)

Thanks 0

8 Entries

6/1/2021 10:40 AM	Rate (0)
vivid5 Member Joined: 8/29/2017 Last visit: 6/28/2022 Posts: 10 Rating: (0)	Hello Dears I have a question about encoder What is the difference between ssi31 and ssi39r1 in absolute encoder interface? Thank you for your attention Attachment WhatsApp Image 2021-05-31 at 15.49.15.jpeg (287 Downloads)
	Last edited by: vivid5 at: 06/01/2021 11:45:18
Suggestion To thank Quote Answer

6/1/2021 11:44 AM	Rate (0)
vivid5 Member Joined: 8/29/2017 Last visit: 6/28/2022 Posts: 10 Rating: (0)	SSI39r1 Attachment WhatsApp Image 2021-05-31 at 15.50.51.jpeg (277 Downloads)

Suggestion To thank Quote Answer

6/1/2021 12:27 PM	Rate (1)
Mr.V Silver Member Joined: 6/19/2019 Last visit: 10/29/2024 Posts: 705 Rating: (76)	Here are 2 different encoders: 6FX2001-5FS12 ABSOLUTE VALUE ENCODER 6FX2001-5FS12 SINGLETURN 13 BIT WITH SSI, OPERAT. VOLT. 10-30 V SYNCHRONOUS FLANGE SHAFT 6MM RADIAL FLANGE SOCKET and 6FX2001-5QS12 ABSOLUTE VALUE ENCODER 6FX2001-5QS12 SINGLETURN 13 BIT WITH SSI, OPERAT. VOLT. 10-30 V STRIP FLANGE SHAFT 10MM RADIAL FLANGE SOCKET One flange shaft 6mm other strip flange shaft 10mm I think they have same interface SSI
	Last edited by: Mr.V at: 06/01/2021 12:27:54
Suggestion To thank Quote Answer

6/1/2021 12:41 PM	Rate (0)
vivid5 Member Joined: 8/29/2017 Last visit: 6/28/2022 Posts: 10 Rating: (0)	Hello Mr.v dear I know the difference in flange and shaft size, I only have question about the number after SSI . What does this code represent? thanks for your answer
	Last edited by: vivid5 at: 06/01/2021 12:42:55 Last edited by: vivid5 at: 06/01/2021 12:45:00
Suggestion To thank Quote Answer

6/1/2021 12:46 PM	Rate (1)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 11/8/2024 Posts: 5935 Rating: (815)	Hello, there is no difference in functionality between SSI39r1 and SSI31. You can connect both to a SMC30. It is an internal order description.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

6/2/2021 5:16 AM	Rate (0)
vivid5 Member Joined: 8/29/2017 Last visit: 6/28/2022 Posts: 10 Rating: (0)	hello Technology Team Is there any documentation on the difference between these numbers that can be provided? thanks for your answer

Suggestion To thank Quote Answer

6/2/2021 3:40 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 11/8/2024 Posts: 5935 Rating: (815)	Hello, sorry, no. But there is no difference in functionality.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

6/3/2021 5:24 AM	Rate (0)
vivid5 Member Joined: 8/29/2017 Last visit: 6/28/2022 Posts: 10 Rating: (0)	yes Thank you very much for your answers

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_General

Follow us on