Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC flexible RT starts printing by itself

Created by: Autech at: 6/9/2007 9:48 AM (7 Replies)

Rating (4)

Thanks 5

8 Entries

6/9/2007 9:48 AM	Rate (0)
Autech Posts: 28 Rating: (2)	Occasionally, I get a document for printing in my printer by itself having the name "WinCC flexible RT Meldungen" Datatype: RAW. Pages: 2. The size is less than 150 bytes. I searched throughout the project for "Print" with "Find in Project" but nothing was found. How can Idisable this? Thank you.
Autech Posts: 28 Rating: (2)
Suggestion To thank Quote Answer

6/9/2007 11:53 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi is anything started by your WinCC flexible scheduler?? nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

6/9/2007 11:59 AM	Rate (0)
Autech Posts: 28 Rating: (2)	Thank you for trying to help me. There is nothing in the Scheduler.
Autech Posts: 28 Rating: (2)
Suggestion To thank Quote Answer

6/11/2007 11:14 AM	Rate (2)
Autech Posts: 28 Rating: (2)	Hello, I have just found the solution. In case someone else has the same problem, the cause was abox checked - the "Report" settingin Project->Alarm Management->Settings->Alarm Settings, which is checked by default. Unchecking the box will make the RT to stop printing.
Autech Posts: 28 Rating: (2)
Suggestion To thank Quote Answer
This contribution was helpful to 4 thankful Users bosandzeros Fundel Joël Golinucci reve123

5/6/2014 4:38 PM	Rate (0)
Robert V Posts: 12 Rating: (0)	Hah, i had the same problem, thanks for posting this
Robert V Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

10/31/2017 10:47 AM	Rate (0)
Joël Golinucci Regular Member Joined: 3/22/2012 Last visit: 10/3/2024 Posts: 40 Rating: (0)	I have the same issue with WinCC TIA Advance V14 SP1. It's fun to see that the printing task is still called "WinCC flexible RT Meldingen" even though I've never installed WinCC Flexible on my computer ;-) But I cannot find in WinCC TIA where to uncheck this box you were talking about. Attachment print.PNG (534 Downloads)

Suggestion To thank Quote Answer

12/9/2019 2:43 PM	Rate (1)
AutoGen_4473529 Posts: 1 Rating: (1)	I would also like to know how to turn this off in V15 und following. It tried to print 56 Pages. What a waste of paper! Changing the default printer is not a good option. This gets set by the domain. Update: I think I have found it: Edit the Runtime-Settings of the Panel
AutoGen_4473529 Posts: 1 Rating: (1)	Last edited by: AutoGen_4473529 at: 12/09/2019 14:46:37
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Konstantin_D

6/7/2021 7:35 PM	Rate (1)
AutoGen_864576 Experienced Member Joined: 4/28/2015 Last visit: 10/7/2024 Posts: 1 Rating: (1)	Thank you. This has tormented me for a while.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on