Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Can we leave blank slot in Siemens PLC? What is used to connect input/output module to CPU in Siemens PLC?

Created by: ujjgy at: 12/28/2021 7:58 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

12/28/2021 7:58 PM	Rate (0)
ujjgy Member Joined: 12/28/2021 Last visit: 1/2/2022 Posts: 1 Rating: (0)	Can we leave blank slot in Siemens PLC? What is used to connect input/output module to CPU in Siemens PLC? tellthebell
	Last edited by: ujjgy at: 01/02/2022 17:41:43
Suggestion To thank Quote Answer

12/28/2021 9:53 PM	Rate (0)
itafusna Silver Member Joined: 2/17/2020 Last visit: 11/18/2024 Posts: 1123 Rating: (206)	Hi ujjgy, What Siemens PLC are you using exactly?
	A rating will be well appreciated.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users jacek d

12/29/2021 8:18 AM	Rate (0)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 11/18/2024 Posts: 4028 Rating: (603)	Hi, with ET200SP it´s possible to project empty slots. Regards, Towome
	If my post was useful, please rate me - if not, please tell me - thank you!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on