6/16/2022 3:52 PM | |
Joined: 11/11/2021 Last visit: 6/16/2022 Posts: 2 Rating:
|
Hi I have a ROMI CNC lathe with Siemens 810d controller The problem came when I switched on the machine gave reference and started the spindle slowly 500rpm to warm up After 5 min I wasn't near the machine I heard it slowing down and than it stopped When I went back I found an error nck no sign of life and now when I switch it on it's not booting up I contacted the manufacturer and first told me to change back up battery and then he instructed me how to reset the nck and PLC the problem is that the PLC does not want to reset it is stuck on 8 Now the manufacturer told me that the simodrive is faulty Can someone help with this issue or where I can send the simodrive for service please I thank you in advance Ian ------------------------------------------------------------------------------------------ |
Last edited by: CS Moderator at: 06/16/2022 21:46:19New subject after splitting |
|
6/16/2022 5:25 PM | |
Joined: 12/18/2014 Last visit: 8/16/2024 Posts: 33574 Rating:
|
Hello Zikizokk, at first welcome to the forum. Please be so kind and don't post twice for the same problem. You make also a own topic: Simodrive 611
|
6/16/2022 9:47 PM | |
Joined: 9/1/2005 Last visit: 8/12/2024 Posts: 4104 Rating:
|
closed cause question posted twice. The second thread with the subject Simodrive 611 is published within the conference SINUMERIK CNC automation systems Best regards |
My Forum is the place to personalize your profile, |
|
Follow us on