Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SINAMICS V90: up to which firmware version can I upgrade this drive safely?

Created by: lucasm at: 7/20/2022 8:11 PM (9 Replies)

Rating (0)

Thanks 0

10 Entries

7/20/2022 8:11 PM	Rate (0)
lucasm Regular Member Joined: 11/30/2015 Last visit: 9/16/2024 Posts: 18 Rating: (0)	Hello Specialists, My V90 drive is a 6SL3210-5FE11-0UA0 (SNC-A5E03662018). My motor is a "newer" one (1FL6042-2AF21-1AB1). The firmware at the drive is 10301.4 (taken from parameter r29018). My problem is that with this firmware I have to use V Assistant V1.06.02 but this version does not have at the motor data base the motor I want to use. My question is: up to which firmware version can I upgrade this drive safely ? Is there a way to add at the motor data base my motor manually ? Is there a link somewhere for this info ? Crossing my fingers.
	Last edited by: Jen_Moderator at: 07/22/2022 06:44:17 Headline optimized.
Suggestion To thank Quote Answer

7/21/2022 5:29 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/13/2024 Posts: 22449 Rating: (3029)	should be possible to update to V1.11.03 https://support.industry.siemens.com/cs/ww/en/view/109746211 The motordata base is coded in the FW/V-Assist and can not modified manually. You should also use the Latest V-Assist V1.07.02 https://support.industry.siemens.com/cs/ww/en/view/109738387

Suggestion To thank Quote Answer

7/21/2022 9:11 AM	Rate (0)
lucasm Regular Member Joined: 11/30/2015 Last visit: 9/16/2024 Posts: 18 Rating: (0)	Good morning Christoph, Thanks a lot for your fast response. Please have a look at this: https://support.industry.siemens.com/forum/ww/en/posts/v90-firmware-update-failed-fault-7995/242330/?page=0&pageSize=10 Also at the drive's manual is recommended to be sure of this, otherwise the drive may not recover. Is there any way to make sure of this ? Also, how come V Assistant does not have "backwards" compatibility ? (This question is not for you of course) Once again thank you and I hope you may have some good news for me. Lucas

Suggestion To thank Quote Answer

7/22/2022 8:49 AM	Rate (0)
lucasm Regular Member Joined: 11/30/2015 Last visit: 9/16/2024 Posts: 18 Rating: (0)	Hi Christophe, I manage to update to V1103 successfully. Still my motor is not listed there. Any suggestions ? Can I upgrade more ? Thanks for your assistance Lucas

Suggestion To thank Quote Answer

7/22/2022 8:50 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/13/2024 Posts: 22449 Rating: (3029)	also use newer v-assistant?

Suggestion To thank Quote Answer

7/22/2022 8:58 AM	Rate (0)
lucasm Regular Member Joined: 11/30/2015 Last visit: 9/16/2024 Posts: 18 Rating: (0)	V1.07

Suggestion To thank Quote Answer

7/25/2022 8:34 AM	Rate (0)
Jack0004 Advanced Member Joined: 12/16/2021 Last visit: 8/22/2023 Posts: 126 Rating: (1)	Hi Lucasm, Please check latest version SINAMICS V-ASSISTANT V1.07.02 Thanks ChristophD also use newer v-assistant?
	Last edited by: Jen_Moderator at: 07/25/2022 13:48:56 Link optimized. If The Information Helpful, Then Don't Forget Give (To thank ) and Rate It
Suggestion To thank Quote Answer

7/25/2022 7:44 PM	Rate (0)
lucasm Regular Member Joined: 11/30/2015 Last visit: 9/16/2024 Posts: 18 Rating: (0)	Hi Jack, I am using V1.07, but the motor is not listed there. Regards Lucas

Suggestion To thank Quote Answer

7/25/2022 8:02 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/13/2024 Posts: 22449 Rating: (3029)	V01.07 is a ioncomplete information please use the exact versiopn you use!

Suggestion To thank Quote Answer

7/26/2022 9:49 AM	Rate (0)
lucasm Regular Member Joined: 11/30/2015 Last visit: 9/16/2024 Posts: 18 Rating: (0)	SINAMICS V-ASSISTANT V1.07.02 I'm sorry for been inaccurate, I thought this was the only version released starting from V1.07 Lucas

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_V

Follow us on