7/22/2022 5:51 PM | |
Joined: 1/20/2022 Last visit: 9/6/2022 Posts: 3 Rating:
|
New to LOGO! and trying to make a Thermostat controlled by a computer. I've created a web page in LWE that controls the NAI1 but my analog amplifier its not transferring that input signal to it AX output. Any ideas how to fix this? AM1 is reading the correct signal.
AttachmentThermostat.zip (452 Downloads) |
7/22/2022 6:05 PM | |
Joined: 12/18/2014 Last visit: 8/20/2024 Posts: 33592 Rating:
|
Why do you mean the amplifier have not the correct output (Ax)? Can you more descibe? |
7/26/2022 8:45 PM | |
Joined: 1/20/2022 Last visit: 9/6/2022 Posts: 3 Rating:
|
So when I expand the amplifier properties it has the AX box witch then can be connected to my mathematic instruction for the on/off differential calculation. When I online test my program the input that I add to my web page isn't showing in that AX box on the amplifier so my set points are not being calculated. I am seeing my input value on the AM1 block so I know that the value is going through the amplifier. Does that help clarify my issue?
AttachmentThermostat.zip (490 Downloads) |
Follow us on