Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

In Set PG/PC Interface, Communication drivers are not found !!!

Created by: vikram.mani at: 7/9/2018 4:16 PM (13 Replies)

Rating (10)

Thanks 13

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

7/5/2020 1:42 PM	Rate (1)
Eng-Mohamed Posts: 14 Rating: (1)	What you mean by changing the start up mode to automatic? vikram.mani vikram.mani Hi all, I found that problem is in service: "S7DOS Help Service". 1. Check if this service exist and if it is running on your PC. 2. If the service does not exist do following: a) check if this file exist on your PC: Program Files\Common Files\Siemens\Automation\SimaticOAM\bin\s7oiehsx64.exe b) make the service by "sc" command (run command line as administrator): sc.exe create "S7DOS Help Service" binPath= "C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oiehsx64.exe" c) run the service and change the start up mode to automatic. This only help me to solve the problem with "empty PG/PC interface" Hi, This solution i have tried. Now its working fine.
Eng-Mohamed Posts: 14 Rating: (1)
Suggestion To thank Quote Answer

10/3/2020 4:53 PM	Rate (0)
ramrao Regular Member Joined: 5/8/2012 Last visit: 9/23/2024 Posts: 7 Rating: (0)	Thanks for this solutions. Problem was Solved

Suggestion To thank Quote Answer

10/24/2021 9:45 AM	Rate (0)
amir habibpour Member Joined: 12/17/2020 Last visit: 11/12/2024 Posts: 1 Rating: (0)	thank you very much for your help and support. I had same problem then I proceed your solution and now it is working.

Suggestion To thank Quote Answer

3/21/2023 3:48 PM	Rate (0)
Charles from Holland Member Joined: 9/14/2012 Last visit: 3/21/2023 Posts: 1 Rating: (0)	Many thanks! It is working now

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on