Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

RF185C is not reading

Created by: NemoTL at: 3/23/2023 10:14 PM (8 Replies)

Rating (1)

Thanks 2

9 Entries

3/23/2023 10:14 PM	Rate (0)
NemoTL Member Joined: 1/14/2022 Last visit: 1/8/2024 Posts: 5 Rating: (0)	I'm implementing RF185C and I can not ready tag yet. The reader is blue and turn white when detect tag. I'm not able to do auto configuration. I execute Reset block and it return Done. I execute Ready block and It stay in Busy. My reader is RF340R. Attachment RF185C.PNG (789 Downloads)

Suggestion To thank Quote Answer

3/24/2023 6:53 AM	Rate (0)
AutoGen_242158 Advanced Member Joined: 2/10/2015 Last visit: 10/31/2024 Posts: 114 Rating: (14)	Could you please show the HW configuration of the device and the configuration of the technology object?

Suggestion To thank Quote Answer

3/24/2023 12:12 PM	Rate (0)
AutoGen_603526 Member Joined: 2/10/2015 Last visit: 10/22/2024 Posts: 12 Rating: (0)	Hi, I think You didn't configurate the reader in technology object. Please see attached picture. In yout TO I can't see the right Moby Mode. (compared with my TO) Attachment TO__Configs.xml.png (565 Downloads)
	Last edited by: AutoGen_603526 at: 03/24/2023 12:14:44
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users LittleJohn00

3/24/2023 12:19 PM	Rate (0)
AutoGen_603526 Member Joined: 2/10/2015 Last visit: 10/22/2024 Posts: 12 Rating: (0)	Attachment TO2.png (454 Downloads)

Suggestion To thank Quote Answer

3/24/2023 1:57 PM	Rate (0)
NemoTL Member Joined: 1/14/2022 Last visit: 1/8/2024 Posts: 5 Rating: (0)	Hi, let me know if those picture can help , thank you for your support

Suggestion To thank Quote Answer

3/24/2023 1:59 PM	Rate (0)
NemoTL Member Joined: 1/14/2022 Last visit: 1/8/2024 Posts: 5 Rating: (0)	Hi, let me know if those picture can help , thank you for your support

Suggestion To thank Quote Answer

3/24/2023 2:01 PM	Rate (0)
NemoTL Member Joined: 1/14/2022 Last visit: 1/8/2024 Posts: 5 Rating: (0)	It only allow me to select Ident device, and I linked it to CM configuration. It doesn't allow me to do auto configuration

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users LittleJohn00

3/27/2023 7:04 AM	Rate (1)
AutoGen_242158 Advanced Member Joined: 2/10/2015 Last visit: 10/31/2024 Posts: 114 Rating: (14)	The wrong module is selected in the technology object. The module 'configuration' is selected instead of the module for the reader. Changing that should fix your problem. Attachment 2023-03-27 09_10_19-Window.png (581 Downloads)
	Last edited by: AutoGen_242158 at: 03/27/2023 07:40:29
Suggestion To thank Quote Answer

3/29/2023 7:57 PM	Rate (0)
NemoTL Member Joined: 1/14/2022 Last visit: 1/8/2024 Posts: 5 Rating: (0)	Yeah ,I changed it and working right now . Thank you

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on