4/27/2023 8:49 PM | |
Joined: 6/11/2019 Last visit: 5/9/2024 Posts: 2192 Rating: (98) |
Hello Andrus_Saar, "Ernstho" and I also had a question in the German forum : Linearen Kurvenverlauf ändern ?? greeting Ella_68 (translated with Google) |
4/28/2023 1:40 AM | |
Joined: 12/18/2014 Last visit: 5/10/2024 Posts: 33002 Rating: (4078)
|
Attached is a suggested solution. You need to split your S-Curve into multiple sections and calculate a different gain and offset for each section. Example section AI values 400-600 (AQ values 250-750): AttachmentS-curve_8.3.zip (297 Downloads) |
4/28/2023 5:16 AM | |
Joined: 10/15/2022 Last visit: 5/3/2024 Posts: 66 Rating: (2) |
Hi Solution is pretty simple and only few blocks. Many thanks. I added tekst box and analog ramp (cursor key C1 is triggering) to make bar graphs moving automatically. Possible to change ramp speed in display. Andrus AttachmentS-curve_8.3 with ramp.zip (246 Downloads) |
Last edited by: Andrus_Saar at: 04/28/2023 05:18:06Last edited by: Andrus_Saar at: 04/28/2023 05:21:29 |
|
This contribution was helpful to1 thankful Users |
Follow us on