Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIMIT Library for Optical Readers (MV500)

Created by: AutoGen_4610217 at: 6/27/2023 9:48 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

6/27/2023 9:48 AM	Rate (0)
AutoGen_4610217 Joined: 5/2/2023 Last visit: 1/26/2024 Posts: 4 Rating: (0)	Does anyone knows if there are Libraries for the MV500 family to simulate them in SIMIT? If not any ideas on how to make an example? Where and how to start? I need to read QR Codes from boxes and we will simulate them together with PlantSim.

Suggestion To thank Quote Answer

6/27/2023 10:51 AM	Rate (0)
AutoGen_242158 Advanced Member Joined: 2/10/2015 Last visit: 10/31/2024 Posts: 114 Rating: (14)	Unfortunately I don't. It's available for RFID devices. If you're planning to use the Ident Profile blocks, that could help? Since the interface would almost be the same.

Suggestion To thank Quote Answer

6/27/2023 11:40 AM	Rate (0)
AutoGen_4610217 Joined: 5/2/2023 Last visit: 1/26/2024 Posts: 4 Rating: (0)	Do you mean using the Library for RFID devices as if they were Optical Reader?

Suggestion To thank Quote Answer

6/27/2023 11:50 AM	Rate (0)
AutoGen_242158 Advanced Member Joined: 2/10/2015 Last visit: 10/31/2024 Posts: 114 Rating: (14)	I have no simit ecperience and I don't know if existing components can be reused or changed. But yes, that was the idea. I was hoping the info could help.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_4610217

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on