Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Help to receive data from a remote logo

Created by: alessandro_dos santos58 at: 10/9/2023 7:49 PM (7 Replies)

Rating (0)

Thanks 0

8 Entries

10/9/2023 7:49 PM	Rate (0)
alessandro_dos sa... Joined: 9/27/2023 Last visit: 10/24/2024 Posts: 4 Rating: (0)	BOA TARDA PRÉCISO DE AJUDA PARA RECEBER ESSE BIT VIA REDE NÃO CHEGA DE JEITO NENHUM JA PROGRAMEI OS BLOCOS ENTRADA E SAÍDA DE REDE ALGUÉM JÁ PASSOU POR ISSO? Attachment Captura de Tela (22).png (282 Downloads)
	Last edited by: alessandro_dos santos58 at: 10/09/2023 19:51:00 Last edited by: Jen_Moderator at: 10/10/2023 08:37:53 Headline translated.
Suggestion To thank Quote Answer

10/10/2023 8:39 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	Hello alessandro_dos santos58, welcome to the community! Please try to discuss your question in English language. This is an international community, and we try to focus on one language. Posting in English will help you to get more response to your question. This is the translation of your question: alessandro_dos santos58 good morning I need help to receive this bit via the network it doesn't arrive at all I have already programmed the network input and output blocks has anyone experienced this? Regards, Jen_Moderator

Suggestion To thank Quote Answer

10/10/2023 11:58 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/9/2024 Posts: 34179 Rating: (4256)	Have you alloewd the S7 access? File > Properties > Offline Settings > General

Suggestion To thank Quote Answer

10/10/2023 7:53 PM	Rate (0)
alessandro_dos sa... Joined: 9/27/2023 Last visit: 10/24/2024 Posts: 4 Rating: (0)	ja habilitei nas duas, porem sem exito mudei para comunicação modbus mas também não consigo ler esse bit,sabe me dizer como eu faço para ler esse bit via modbus? quando meus 2 logos estão na mesma árvore de projeto eu consigo comunicar entre eles,o problema é que lá em campo eles estão em projetos separados então eu não posso deixá-los na mesma árvore do projeto de rede Attachment Captura de Tela (23).png (327 Downloads)

Suggestion To thank Quote Answer

10/10/2023 8:00 PM	Rate (0)
alessandro_dos sa... Joined: 9/27/2023 Last visit: 10/24/2024 Posts: 4 Rating: (0)	apos eu mudar para modbus como ficou

Suggestion To thank Quote Answer

10/10/2023 8:01 PM	Rate (0)
alessandro_dos sa... Joined: 9/27/2023 Last visit: 10/24/2024 Posts: 4 Rating: (0)	apos eu mudar para modbus como ficou Attachment Captura de Tela (25).png (299 Downloads)

Suggestion To thank Quote Answer

10/11/2023 2:13 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/9/2024 Posts: 34179 Rating: (4256)	English please I you want answers ...

Suggestion To thank Quote Answer

10/11/2023 6:12 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	Hello alessandro_dos santos58, please use englisch as a language, because we are an international community and the main language in this forum is Englisch. If you want to get a (quick) answer, posting in englisch is the best way. These are the translations of your posts: alessandro_dos santos58 I've already enabled both, but to no avail. I switched to modbus communication but I can't read this bit either, can you tell me how I can read this bit via modbus? When my 2 logos are in the same project tree I can communicate between them, the problem is that in the field they are in separate projects so I can't leave them in the same network project tree alessandro_dos santos58 After I changed to modbus how did it look Regards, Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on