Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Where can we find the vtc (velocity time constant) in the Tia Portal menus?

Created by: Ziemens at: 11/3/2023 2:49 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/3/2023 2:49 PM	Rate (0)
Ziemens Silver Member Joined: 3/2/2007 Last visit: 11/7/2024 Posts: 944 Rating: (5)	Kindly, where can we find the vtc (velocity time constant) in the Tia Portal menus ? ------------------------------------------------------------------------------------------ Split from Time constant for the balancing filter vTC.
	Last edited by: Jen_Moderator at: 11/06/2023 08:50:12 New subject after splitting ... thank you ...
Suggestion To thank Quote Answer

11/6/2023 12:36 PM	Rate (0)
jacek d Platinum Expert Joined: 9/23/2005 Last visit: 11/8/2024 Posts: 4781 Rating: (730)	TO_PositioningAxis -> Configuration -> Extended parameters -> Control loop However it is called "Speed control loop substitute time" there.
	Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on