6/6/2024 11:26 PM | |
Joined: 6/6/2024 Last visit: 8/14/2024 Posts: 2 Rating:
|
Hola por favor alguien podría ayudarme a migrar este proyecto de protool a wincc flexible 2008 sp3 muchas gracias ------------------------------------------------------------------------------------------ AttachmentTDOP.zip (132 Downloads) |
Last edited by: Jen_Moderator at: 06/07/2024 06:32:27New subject after splitting |
|
6/20/2024 12:12 PM | |
Joined: 8/3/2009 Last visit: 9/6/2024 Posts: 13594 Rating:
|
Hello you have to use WinCC flexible 2008 Sp2 or older to migrate a Protool project. you can download the SW here: https://support.industry.siemens.com/cs/ww/en/view/100777999 Here are a few tipps and tricks: https://support.industry.siemens.com/cs/ww/en/view/18796902 Bye Murof |
Last edited by: Murof at: 06/20/2024 12:12:37If this Information really helps, you could use the Rate function |
|
Follow us on