Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Tia Portal - How to implement function FB38000 with Sina_Pos function - S120

Created by: PLCAutomationEngineer at: 7/8/2024 6:33 AM (2 Replies)

Rating (1)

Thanks 1

3 Entries

7/8/2024 6:33 AM	Rate (0)
PLCAutomationEngi... Member Joined: 10/8/2020 Last visit: 7/10/2024 Posts: 2 Rating: (0)	Good morning, I communicate with the drive Sinamics S120 via telegram 111 and to positioning use Sina_Pos function. I would like to add FB38000 function to encoder adjustment. I read documentation but I can not find any information which additional telegram I should use to implement this function. How to implement function FB38000 with Sina_Pos function ?
	Last edited by: PLCAutomationEngineer at: 07/08/2024 06:33:31
Suggestion To thank Quote Answer

7/8/2024 7:13 AM	Rate (1)
jacek d Platinum Expert Joined: 9/23/2005 Last visit: 11/18/2024 Posts: 4793 Rating: (733)	What is the FB38000? Is it from any library? Does it have any name?
	Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer

7/8/2024 8:02 AM	Rate (0)
PLCAutomationEngi... Member Joined: 10/8/2020 Last visit: 7/10/2024 Posts: 2 Rating: (0)	SINAMICS S/G/V: Simple acyclic Funktions Blocks for Controlling a SINAMICS in TI... - ID: 109760317 - Industry Support Siemens

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users 0_Einstein

|

Share this page:

Share this page on...

Follow us on