Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LOGO! mqtt can change prefix?

Created by: AutoGen_1285514 at: 7/11/2024 6:42 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/11/2024 6:42 AM	Rate (0)
AutoGen_1285514 Joined: 8/18/2023 Last visit: 8/8/2024 Posts: 3 Rating: (0)	I want to change prefix payload when subscribe data from LOGO!, it's possible to change prefix payload before publish using ladder diagram in LOGO! Soft Comfort? Message from LOGO!: {"state"{"reported":{"var1"{"desc":"V-byte-0-2","value":[20]}}}} Message I want: {"mydata":{"var1"{"desc":"V-byte-0-2","value":[20]}}}

Suggestion To thank Quote Answer

7/11/2024 6:55 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	I don't see any possibility unless you rewrite the software and firmware.

Suggestion To thank Quote Answer

7/11/2024 7:13 AM	Rate (0)
AutoGen_1285514 Joined: 8/18/2023 Last visit: 8/8/2024 Posts: 3 Rating: (0)	Thank you for answer

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on