Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ATV312 on siemens cm module canopen

Created by: elektro@lvs-bv.nl at: 1/20/2015 2:57 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

1/20/2015 2:57 PM	Rate (0)
elektro@lvs-bv.nl Member Joined: 4/23/2013 Last visit: 10/4/2024 Posts: 1 Rating: (0)	Hello, I have a problem. I want want to control a ATV312 on canopen. I have a HMS cm module on my s7-1200/ I can start / stop my atv312, but i can't set the speed. I know that u have to do that with PDO6. Can anyone tell me how? is there a example program?

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_6839544

3/14/2019 5:50 PM	Rate (0)
AutoGen_6839544 Regular Member Joined: 6/29/2016 Last visit: 7/5/2024 Posts: 1 Rating: (0)	Hello. Now I have project with the same PLC and ATV312 with canOpen . Have You managed it? Can You help me with it?

Suggestion To thank Quote Answer

7/22/2024 3:14 AM	Rate (0)
AutoGen_8417831 Joined: 1/23/2024 Last visit: 7/22/2024 Posts: 1 Rating: (0)	hello, I want to know if you fixed your issue, I also meet that problem, so I want to know if you can give me some help, thank you so much.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on