Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Is Siwarex FTA plug and play Module

Created by: milos23 at: 8/7/2024 9:29 AM (2 Replies)

Rating (0)

Thanks 2

3 Entries

8/7/2024 9:29 AM	Rate (0)
milos23 Advanced Member Joined: 11/21/2020 Last visit: 10/25/2024 Posts: 179 Rating: (0)	Hi, Is Siwarex FTA plug and play module or some adjustment/programming is necessary in order to replace broken module?

Suggestion To thank Quote Answer

8/8/2024 6:29 AM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 10/15/2024 Posts: 1147 Rating: (175)	Hello milos23, The parameter-settings are stored into the Siwarex FTA module. Therefore, when you have a broken Siwarex FTA module, then you have to read out the parameter-settings from that broken Siwarex FTA module. You can read out the parameter-settings with the Siwatool-software, or you can read out the parameter-settings with the PLC into the Scale-DB of your Siwarex FTA module Afterwards, you have to replace the broken Siwarex FTA module through a new Siwarex FTA module, and download the parameter-settings with the Siwatool-software (or from the Scale-DB) to the new Siwarex FTA module. Best regards Siwarexi

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Moderator_Lan milos23

8/8/2024 2:07 PM	Rate (0)
milos23 Advanced Member Joined: 11/21/2020 Last visit: 10/25/2024 Posts: 179 Rating: (0)	Thanks

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on