how to configure the delay time (investigation time) in Siemens FX724/726/ Cerberus Tools
Created by: Kgyi at: 8/7/2024 9:27 AM (2 Replies)
Rating 
Thanks 1
3 Entries
| 8/7/2024 9:27 AM | |
|
Posts: 1 Rating:
|
Hello to all my seniors, I would like to know that how to configure the delay time (investigation time) in Siemens FX724/726/ Cerberus Tools. Now, I configure the delay time in control task card, not in detection task card. And what happen there is automatic and manual alarm are the same under delay time. I don't want this, what I want is there is no delay time for manual alarm and delay time is only on automatic alarm. Please help and support to me. Kgyi Yours Junior ------------------------------------------------------------------------------------------ |
Last edited by: Moderator_Lan at: 08/07/2024 10:26:05New subject after splitting |
|
This contribution was helpful to
|
|
| 8/13/2024 3:01 AM | |
Joined: 2/7/2022 Last visit: 12/16/2025 Posts: 36 Rating:
|
do you have BDV? |
|
Fire safety |
|
| 11/25/2025 10:41 AM | |
Joined: 8/12/2025 Last visit: 12/24/2025 Posts: 5 Rating:
|
Check in Control Tree. If you check Carefully then you can see the Activation Delay option |
Follow us on