Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

GSD-file folder in catalogue is empty

Created by: BitBob at: 8/13/2024 8:56 AM (5 Replies)

Rating (0)

Thanks 2

6 Entries

8/13/2024 8:56 AM	Rate (0)
BitBob Joined: 8/13/2024 Last visit: 9/25/2024 Posts: 3 Rating: (0)	Hi, i have a problem with installing the GSD file for SITRANS LT500 Profinet Step 7. After installing, which goes fine, updating the catalogue, then the GSD file folder appears but is empty and i cant drag and drop any device to my HWconfig. Any help here? Best regards Attachment Uden titel.jpg (126 Downloads)

Suggestion To thank Quote Answer

8/13/2024 8:57 AM	Rate (0)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 11/6/2024 Posts: 22434 Rating: (3029)	check the folder additional field devices (the first one)

Suggestion To thank Quote Answer

8/13/2024 9:24 AM	Rate (0)
BitBob Joined: 8/13/2024 Last visit: 9/25/2024 Posts: 3 Rating: (0)	Its not there.

Suggestion To thank Quote Answer

8/13/2024 9:37 AM	Rate (0)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 11/6/2024 Posts: 22434 Rating: (3029)	which step7 you use? on my Step7 V5.7 SP1 install it work without any problem

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users BitBob

8/13/2024 12:10 PM	Rate (0)
LevelWac Member Joined: 4/27/2015 Last visit: 10/31/2024 Posts: 34 Rating: (4)	Hi BitBob, are you downloading the latest FW file from SiePortal here: https://support.industry.siemens.com/cs/ww/en/view/109784457 Have you read through the Application Guide here: https://support.industry.siemens.com/cs/ww/en/view/109810294
	Richard Deal \| LevelWac Technical Support - Level and Dynamic Weighing -> send us your Support Request here: https://support.industry.siemens.com/cs/my/src?lc=en-ww Richard Deal \| LevelWac Technischen Support - Füllstand und Dynamische Wägetechnik -> schicken Sie uns Ihre Support-Anfrage hier: https://support.industry.siemens.com/cs/my/src?lc=de-ww
Suggestion To thank Quote Answer

8/13/2024 1:22 PM	Rate (0)
BitBob Joined: 8/13/2024 Last visit: 9/25/2024 Posts: 3 Rating: (0)	Thanks ChristophD It worked. Apparently my version was step 7 5.6 so updated to 5.7 SP 2 which didnt work at all. So i downgraded to 5.7 SP1 which works!

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ChristophD

|

Share this page:

Share this page on...

Follow us on