Navigation

How to Read Swapped Float from Data Block having Holding registares

Created by: Bibin010 at: 8/8/2024 9:58 AM (1 Replies)

8/8/2024 9:58 AM	Rate (0)
Bibin010 Joined: 9/13/2023 Last visit: 11/5/2024 Posts: 13 Rating: (0)	Hello, I am reading data from a modbus slave device and the holding registers are received in a data block I want to read the data from these holding registers as swapped float type. Please help. Thanks

Suggestion To thank Quote Answer

8/29/2024 10:03 AM	Rate (1)
Techno_Taru Bronze-Expert Joined: 1/11/2019 Last visit: 11/7/2024 Posts: 791 Rating: (153)	Hello Bibin, You can use Shift and Rotate blocks to swap the data.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users danw