Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Eplan export from TIA Selection Tool

Created by: ChrisHopeCAM at: 10/1/2024 10:35 AM (4 Replies)

Rating (0)

Thanks 1

5 Entries

10/1/2024 10:35 AM	Rate (0)
ChrisHopeCAM Member Joined: 8/2/2021 Last visit: 10/9/2024 Posts: 3 Rating: (0)	I've created a project in TIA Selection Tool and I'm trying to export to Eplan. When I go to the export screen the status is stuck at "In progress" and will not get to the point where I can download. I've tried uninstalling, reinstalling, restarting laptop and it has had no effect. Does anyone have any suggestions please? Thanks Attachment TIA Selection Tool.png (54 Downloads)

Suggestion To thank Quote Answer

10/1/2024 2:03 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 11/1/2024 Posts: 15376 Rating: (2442)	Use the online TIA Selection Tool at https://mall.industry.siemens.com/tstcloud/#/configuration/ ChrisHopeCAM I've created a project in TIA Selection Tool and I'm trying to export to Eplan. When I go to the export screen the status is stuck at "In progress" and will not get to the point where I can download. I've tried uninstalling, reinstalling, restarting laptop and it has had no effect. Does anyone have any suggestions please? Thanks
	science guy
Suggestion To thank Quote Answer

10/1/2024 2:24 PM	Rate (0)
ChrisHopeCAM Member Joined: 8/2/2021 Last visit: 10/9/2024 Posts: 3 Rating: (0)	Hi, the online version does not allow for eplan generation/export. Attachment 2024-10-01_15h20_11.png (26 Downloads)

Suggestion To thank Quote Answer

10/1/2024 2:29 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 11/1/2024 Posts: 15376 Rating: (2442)	Does it allow for export or saving as a configuration you can then open with the installable selection tool? If so, it might correct any errors the local software tool might be making (without your ability to fix or influence because of some bug). ChrisHopeCAM Hi, the online version does not allow for eplan generation/export.
	science guy
Suggestion To thank Quote Answer

10/1/2024 3:20 PM	Rate (0)
ChrisHopeCAM Member Joined: 8/2/2021 Last visit: 10/9/2024 Posts: 3 Rating: (0)	I've exported from the online version, reopened in desktop and exported to eplan successfully! Thanks for your help.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users 0_Einstein

|

Share this page:

Share this page on...

Follow us on