Hi Everyone,

I have a new machine coming into our facility and the HMI i'm told is programmed using Protool/Pro CS V6.0

I've approached Siemens and they no longer provide in on a cd/download version.

Is anyone here able to help me?

Regards,

Colin

Hi!

As it is shown in the SIOS, you need to have the CD for ProTool V6.0 in order to use it. If you follow the link you can read this information in detail.

https://support.industry.siemens.com/cs/es/en/view/109746195

In this case, I would recommend contacting your regular person related to Siemens.

Br!

Hello colin904!

There is no official download for Protool available from Siemens:

https://support.industry.siemens.com/cs/ww/en/view/42628254

-> As suggested, try to contact your Sales contact

Bye Murof

Can we download the protool v6.0 from the web of the siemens?
there are only the sp1,sp2,sp3 vision

how can I down the original basic vision?

 Hello 

guoliang_li1544

Can we download the protool v6.0 from the web of the siemens?
there are only the sp1,sp2,sp3 vision

how can I down the original basic vision?

The installation software for ProTool is not available on the Siemens website.

If you have a good Siemens sales partner, you can try contact them to get the installation files, but unfortunately, that doesn't always work.

Alternatively, you could check online marketplaces; you might be able to buy one there.

Best regards, Costanza