I’m reaching out to see if anyone has experienced a similar issue with the IOT2050 modules (6ES7647-OCA00-1AA2).

I followed all the recommended steps to boot the device using a microSD card with the official image written via Win32 Disk Imager. However, when I power the device with the microSD inserted, the STAT LED briefly turns green and then stays solid red. I can’t find any documentation explaining what might cause this behavior.

I’ve already tried different firmware versions, multiple microSD cards, and confirmed that the power supply is correct, but the problem occurs on both modules.

Does anyone know what could be causing this or how to troubleshoot it?

Topic closed, because the question has been posted twice. The active topic can be found via the link above.

Kind regards, Moderator_Lan