Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Actual Value input for SFC type( to control Batch)

Created by: Delphoe at: 9/25/2009 4:54 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/25/2009 4:54 AM	Rate (0)
Delphoe Posts: 120 Rating: (1)	Hi, Pro I'm working with Simatic Batch( PCS7) using SFC-Type to control the sequence. However, up to now I've not found out how to feed back the actual value in order to control the sequence. For example: if I set in the batch for output material : 2kg. so how can I set the actual value input in order to monitor and control. Thanks in advanced.
Delphoe Posts: 120 Rating: (1)
Suggestion To thank

9/25/2009 10:58 AM	Rate (0)
CBo Gold Member Joined: 4/5/2006 Last visit: 10/10/2024 Posts: 917 Rating: (63)	Hi Delphoe , it's same question posted in other tread? I miseundertood something? Use of SFC Type( particularly : characteristics and input/output ... regards

Suggestion To thank

9/25/2009 1:43 PM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Thread closed, because question is already discussed in the thread mentioned by CBo. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on