Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Module Diagnostics

Created by: Ammu at: 9/30/2009 3:34 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/30/2009 3:34 PM	Rate (0)
Ammu Posts: 59 Rating: (0)	Hello Friends i'm using CPU414-4H with ET200M (6ES7 153-2BA02-0XE0)- Redundantand modules: DI - 6ES7 321-1BH01-0AA0 DO - 6ES7 322-1BH01-0AA0 AI - 6ES7331-1KF01-0AB0 AO - 6ES7332-5HF00-0AB0. This are the modules i'm using. so can i get the diagnostics of this modules ( whether module is working or not) from the Diagnostics address of the IM. If it is possible how can i extract module information from this Slave Diagnostics address. so please provide the solution for this. Waiting for ur reply friends............ Regards, AMMU.
Ammu Posts: 59 Rating: (0)	Last edited by: Ammu at: 9/30/2009 4:08 PM
Suggestion To thank Quote Answer

10/2/2009 7:37 PM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 11/6/2024 Posts: 4516 Rating: (839)	Dear Ammu, I think you will found the answer in the following thread. Report System Error Regards,
	Ayman Elotaify
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on